[metalguru (OP)]

Had a day playing, Motad can and link pipe both modified to fit, nice deep sound, will be shortening the can. Screen height adjusters, wind blast gone at 100 mph, dogbones to lower seat by 45mm, and Givi box mount. Had to test ride it after!!





 

[Sin_Tiger]

  nice.  45mm jings you'll need a step ladder to get off it

[Marc]

this is a nice site with idea's..

http://tiger1200.adrianmolloy.com/1200_Remus_Exhaust.html

[robxxxx]

Thats the Batzen bracket. How you getting on with it? And is that the standard screen, or touring?
I bought a Palmer screen and bracket and was somewhat disappointed with it. Even went to the larger screen. And to cap it all, it was a pain in the arse to adjust the hight. 
Recently bought a Givi Airflow, and somewhat liking it, but still not perfect.

[metalguru (OP)]

Standard screen and Batzen adjusters, have lowered the rear suspension by 45mm and I am 5'10" so the combination of those two will make the screen rake and height different. The Batzen adjusters give a vast adjustment possibilities for all heights. I have tried loads of positions of rake and height ending up where it is now which gives visor up zero turbulence at up to 130mph. It is very easy to change the rake or height as all adjusters are tool free types.
They are VERY well made and powdercoat finish. The next mod maybe to fit a black bikini screen under the adjusters to just fill the space between the screen a headlamps.

 

[threepot]

Nice bike The more I see,the more I want one. Been watching great reviews on youtube

[Sin_Tiger]

It's a pretty impressive package.  Have you seen what Kevin got up to in my backyard?

[threepot]

You mean this..http://www.youtube.com/watch?v=crnd2qQpW9s

Ex demo bike for sale..never thrashed,seen water etc,etc

[Sin_Tiger]

You might not want to joke about that. MCS have just recently lost the Triumph franchise, that means my nearest dealer is either Edinburgh or Carlise 

There were rumblings in the trade that MCS and Triumph had had a serious falling out, certainly did not feel a very comfortable atmosphere the last time I was there last year, managed to keep my mouth shut for a change, now it's official.

Sorry for the hijack MG, looking forward to seeing your next mods 

[metalguru (OP)]

Been playing again and have now fitted a Tomtom Go Sat nav.
I wanted to hardwire the power supply instead of using the accs socket with an adapter.
Sent off for a 5v power supply and found inside the trim panels below the screen are hollow, just right for mounting.



I did solder the 12v side of the supply to the accs socket cables and installed a small push to make latching switch.

Next was to modify the mounting that was used on my Girly and fix the ex windscreen live mount.

 


Here is finished job and for a waterproof cover I use a freezer bag and a re-usable ziptie.



The Bikini screen along with the Batzen adjusters (Thanks Wolfgang), allow visor open and no buffeting at the capped top speed!!

[metalguru (OP)]

Nearly forgot the shortened can.......CAN YOU HEAR ME NOW?

Does bark a bit now.....but in the best possible taste!



Used old dogbones that came off when the lowering ones were fitted to make a mount for the shorter can.

[Sin_Tiger]

Now that's what I call recycling 

[Marc]

Whaw!.. nice job!