Author Topic: Sorting out my passenger handles  (Read 793 times)

0 Members and 1 Guest are viewing this topic.

March 11, 2021, 11:28:33 PMReply #30 on

Offline blacktiger

  • Bengal Tiger
  • Location: St.Leonards on sea, England.
  • Posts: 1623
  • Activity Meter:
    0.67%
  • Bike model currently owned: 800XC
I rode it through a strong gale today, with wind gusts up to 70Mph. Not funny when they come from the side, I can tell you that.

You should try east of the Andes where Nigel and I had trouble holding our bikes up when stopped. We ended the day early because it was just so dangerous. Wish we hadn't because the hotel/motel we chose was like the Bates Motel.  :bug_eye
2013 800XC 33000 miles & counting.

March 12, 2021, 10:39:02 AMReply #31 on

Offline Sin_Tiger

  • I have the POWER !
  • Cool Cats
  • Chatty Cathy
  • *
  • Location: Singapore / Scotland
  • Posts: 5783
  • Activity Meter:
    6.44%
  • Max the Moderator
  • Bike model currently owned: Trophy SE - renamed Rhoda the Corroda
You should try east of the Andes where Nigel and I had trouble holding our bikes up when stopped. We ended the day early because it was just so dangerous. Wish we hadn't because the hotel/motel we chose was like the Bates Motel.  :bug_eye

Ten years ago that might have been something of a challenge, nowadays crossing the Forth Road Bridge in a gale to stay at an Air BnB booked by Stenhouse Travel Inc. is about my limit  ;)
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint

March 14, 2021, 04:26:07 PMReply #32 on

Offline London_Phil

  • Cool Cats
  • Cheetah
  • *
  • Location: London Town
  • Posts: 680
  • Activity Meter:
    1.11%
  • '12 800XC ABS Orange. of course.
Back to the matter at hand(les)

If its just a cosmetic tart up, then any number of metal sprays can be used.

I use Pro cote quick silver for some things,
https://www.aerosolsolutions.co.uk/product/pro-cote-quick-silver/

I generally find Pro cote is a good brand, but if its going to be used as an anchoring/tie-off handle, only some kind of hard coating is likely to stand the test.
I must say, although my handles are not corroded like yours, they are a really odd colour compared with any part of the bike.
They seem to have gone an odd green/grey/silver colour, and it does look odd.

I don't take pillion or generally tie off luggage, so I will probably spray them with a more pleasing shade..

I might match my Tank

https://www.aerosolsolutions.co.uk/product/pro-cote-tool-orange/

Listen to me, all fashionable like......

March 14, 2021, 06:41:55 PMReply #33 on

Offline Sin_Tiger

  • I have the POWER !
  • Cool Cats
  • Chatty Cathy
  • *
  • Location: Singapore / Scotland
  • Posts: 5783
  • Activity Meter:
    6.44%
  • Max the Moderator
  • Bike model currently owned: Trophy SE - renamed Rhoda the Corroda
Back to the matter at hand(les)

Listen to me, all fashionable like......

I see what you did there  :icon_rolleyes: and that's what happens when you've been married a long time  :augie

I think you're right, powder coat is probably the best option but I have to say I also like the Paracord lacing even if it looks a bit "Preppy"  :kboom
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint

 


SimplePortal 2.3.7 © 2008-2021, SimplePortal