TigerTriple.com

Tiger Time => Tiger 800's (2010 - 2020 Tigers) => Topic started by: ghulst on August 19, 2019, 09:12:29 PM

Title: Changing rectifier
Post by: ghulst on August 19, 2019, 09:12:29 PM
I am taking delivery of a Tiger which probably has a shot rectifier. I've already gotten one from a breaker, as it was too good a deal to pass up. Anyway, are there any how-to's on the subject? Just wondering whether I need to take the whole thing apart, or whether I can get away with just loosening up the radiator to wriggle it in. ;)

(By the way, I did read up on the air filter change and it seems not much has changed since the steamer... It still is a heck of a lot of work.  :icon_lol:)
Title: Re: Changing rectifier
Post by: London_Phil on August 19, 2019, 09:21:16 PM
Pop over to
www.tiger800.co.uk
and join us there.
If I remember, loosening the radiator mounts and allowing it to drop forward should give you enough room, but please check before you do, I'm not always right, unlike my better half....
Title: Re: Changing rectifier
Post by: ghulst on August 19, 2019, 09:53:27 PM
Quote from: London_Phil on August 19, 2019, 09:21:16 PM
I'm not always right, unlike my better half....

:ImaPoser
Title: Re: Changing rectifier
Post by: Lee337 on August 20, 2019, 10:51:56 AM
Pinched from another forum...

My Missus says I only have two faults.

1. I don't listen
2. some other stuff she was rabbiting on about.

:icon_mrgreen:
Title: Re: Changing rectifier
Post by: London_Phil on August 20, 2019, 02:45:01 PM
Going well off topic now...but ask Nick about the dept of double standards.....
Title: Re: Changing rectifier
Post by: ghulst on August 22, 2019, 05:24:03 PM
Quote from: London_Phil on August 19, 2019, 09:21:16 PM
Pop over to
www.tiger800.co.uk
and join us there.
On topic, I did do that. ;) (https://www.tiger800.co.uk/index.php/topic,26711.0.html)

(Edited to add url.)
Title: Re: Changing rectifier
Post by: ghulst on August 27, 2019, 12:03:28 AM
Just to update the thread...

Pulled apart half the front end of the Tiger 800XC today, changed the rectifier by pulling the radiator aside etc. and fixed the bike. :)
Title: Re: Changing rectifier
Post by: London_Phil on August 27, 2019, 08:12:10 AM
Nice One..
Title: Re: Changing rectifier
Post by: ghulst on August 27, 2019, 09:26:26 PM
(https://live.staticflickr.com/65535/48631716626_368575814b_c.jpg)

It has turned out to be a nice beast. ;)
Title: Re: Changing rectifier
Post by: Sin_Tiger on January 19, 2021, 03:35:14 AM
I did like mine, much closer to the Steamer and the XC seemed to handle better than the cast wheel variants, I was told much the same by one of the Triumph development guys during a factory visit back in 2013.

A bargain is hard to pass up when you have spanners doing nothing in the garage  :nod

Title: Re: Changing rectifier
Post by: ghulst on January 19, 2021, 11:31:39 AM
As I've updated the boards, I have decided I might as well open a new topic on this bike and tell the whole story. ;)
EhPortal 1.34 © 2024, WebDev