Hello just put anew rear tyer on my wifes vesper, is there a nack to tubles tyers I can'nt get the tyers to sit properly to get any air in them. :5moped :5moped
I'll assume you have a decent compressor at the very least around 25liters,if you haven't then you've not a hope.
Either stand the wheel upright and put pressure on the tyre to seal it to the rim and if that fails lie the wheel flat and put a rachet strap around the tyre and rachet onto the wheel then put the airline on the valve.
Wot he ↑ said... take the wheel to a petrol station and use their machine :nod
:iagree make sure you remove the valve core try inflating to prevent restricting the air up. A little washing up liquid helps the carcass slip over the bead rib if you don't have any proper bead soap.
Quote from: Chris Canning on April 05, 2017, 08:45:42 PM
I'll assume you have a decent compressor at the very least around 25liters,if you haven't then you've not a hope.
Either stand the wheel upright and put pressure on the tyre to seal it to the rim and if that fails lie the wheel flat and put a rachet strap around the tyre and rachet onto the wheel then put the airline on the valve.
Yes it's 25ltr 9.5 cfm thanks
Quote from: JayDub on April 05, 2017, 09:45:50 PM
Wot he ↑ said... take the wheel to a petrol station and use their machine :nod
Tried that one their machine was not working
Quote from: Sin_Tiger on April 05, 2017, 11:44:27 PM
:iagree make sure you remove the valve core try inflating to prevent restricting the air up. A little washing up liquid helps the carcass slip over the bead rib if you don't have any proper bead soap.
Thank You Sin
:5mopedDone thanks for words of wisdom