okay, I picked up a nail on my 99 this past weekend while riding firetrails. So I removed the wheel and replaced the tube, but did something stupid, I didn't pay much attention to where all the spacers were. So when I went to remount I went by what made sense and it looks right but I would appreciate it if someone might have a picture of both sides of their wheel in the swingarm so I could confirm. My biggest doubt was a larger spacer about 3/4 to an inch long with a thick lip on it. I used this between the wheel and the disc brake caliper holder and I had the thick lip facing out, not twords the wheel. That is the main concern.
Sounds right to me, here is the side your on about, but I aint taking the wheel off :icon_wink:
(http://i55.photobucket.com/albums/g132/cockneytaff/IMG_0485_zpsqkzekok6.jpg)
Gonna have to clean that up now Ive looked at it :icon_sad:
thanks that is exactly what I needed to see!!!