where to buy 855i crashbars in US?

[smoketriples]

So I've diligently read the forums, and have seen many recommendations for crash bars.....but can't find U.S. dealers.  The shipping from Europe or Australia is ..well...HIGH!.

Anyone found a US dealer for 2K Girly?

[Mustang]

these are for 955i tigers they should fit but not really sure

http://www.sportmotogear.com/Triumph_Ti ... 0%2001.htm (http://www.sportmotogear.com/Triumph_Tiger_955i_2001_on_Black_Engine_Guards_p/hb%20501.707%2000%2001.htm)

the 885 i 99-2000 was a two year bastard child run of the tigger not a lot of aftermarket stuff for it when it was new , even less now that it is 12 years old

[Chris Canning]

I've no idea were to buy in the US,but do yourself a favour and the bike  :D ,make sure their Touratech because as and when you need e'm they'll get the job done.

[Mustang]

TouraTech USA has nothing listed for 885I

and doing a little research it looks like you will need bars specific to 885I only.

If you really want a set bad enough you are going to probably have to pay international shipping charges .

[smoketriples]

Anyone have an idea of the differences in the bars from a 955 to the 855i?  

I have a pretty complete shop here, MiG, arc, oxyacet, presses and cutters, about the only thing I don't have is a proper bender or lathe (working on getting a metal lathe).

If it's close, I don't mind putting extra holes in or cutting off a mount and repositioning, if it's really different though not worth the work likely....

-eric

[Dred]

I dream shopped past a set on Ebay yesterday.  The price and shipping will get'm to you for under $500 if I recall correctly.  They are out of the UK, but the price seemed right.

I've got Ma's on my 885i, so you can see if they are still available.  They were american made.  I can't tell you if they are a 955 fitment 'cause they came attached to my bike.

If I was shop'n, I'd jump on the Fleabay set.  Good luck.

[smoketriples]

http://www.triumph-online.co.uk (http://www.triumph-online.co.uk)

http://www.triumph-online.co.uk/tiger-8 ... 4582-p.asp (http://www.triumph-online.co.uk/tiger-885i-1999-00-crash-bars-885i-fuel-injected-tigers-only-4582-p.asp)

$241 USD with shipping.  Guess I can't complain about that!  Exchange rate is a bit helpful today, and even though they show 129 british pounds on the web page, when you add to cart it's 108 pounds, then a break from the VAT since we're not in the EU, and a shipping cost of 35 pounds.

I guess I'll save my cutting and welding skills for the sw mototech centerstand the bike came with.  Now that it's in the flipped eccentric position that stand is useless.  I need to do a bit of cut and paste to make it the right height.

eric

[Timbox2]

Anyone have an idea of the differences in the bars from a 955 to the 855i?  

I have a pretty complete shop here, MiG, arc, oxyacet, presses and cutters, about the only thing I don't have is a proper bender or lathe (working on getting a metal lathe).

If it's close, I don't mind putting extra holes in or cutting off a mount and repositioning, if it's really different though not worth the work likely....

-eric

The 4 main mount points I believe are the same, the oil cooler position is the biggest difference and looking at pictures is right in the way of where the cross bar goes, so thats my guess.

[Chris Canning]

May sound a little odd but when looking for crash bars my priority was 'Are they going to be any good when I need e'm',reduced it very quickly to either Touratech or Thunderbars,they also do e'm for the 885i among other things.

Just about evrything else was unsupported forward facing like a scoop  :(

http://www.thunderbike.co.nz/shopn/spi/ ... bike_5_TIG (http://www.thunderbike.co.nz/shopn/spi/2112727114/tbike_5_TIG)

[Mustang]

thunderbike the best if you can still get em.................

[PeteH]

eric...Im using the same bars, theres a pic in the photos needed thread that shows em from the left side. These bars have payed for themselves as they`ve saved my tank twice :)

More photos on my www.

[smoketriples]

ah good to hear they are durable....I hope not to drop mine, but then I hoped to be rich and good-looking, we know that didn't happen!

<snip> editing my post.  Looked at pics on yours, and looked at the ttechs, can definitely see the difference, but at double the price I'll just stick with the Fehling's and add some support bars and gussets.  Measure, notch, weld, everyone happy :).

Honestly, I just want them for the drop over.  If I lose it at speed I got bigger worries than if my crashbar folded. ....

[topher0268]

These guys in florida have the Hepco Becker's listed for 99-00

http://www.adventuremotorcycleparts.com ... gory_Code= (http://www.adventuremotorcycleparts.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=amp&Product_Code=ET501-703-00-01&Category_Code=)

[smoketriples]

yeh i found them too....after i ordered from the guys in UK.  Don't know if the Heps are better or same as fehlings, but I'm going to beef them up anyway before install.