News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Help, Engine light stays on after changing coolant

Started by EvN, September 11, 2012, 07:39:39 PM

Previous topic - Next topic

EvN

Hi there, I'm new here. I'm from the Netherlands and last week I bought a 885i from 2000 with only 25500 km on it.

Yesterday I changed the coolant and now the engine light is staying on. I did the 3 times starting reset but it doesn't help.
Does anyone have some suggestions what it might be.

BigDan

Get it plugged into TuneECU on a laptop to get the error codes - if not serious, can be wiped and forgotten about :)
2007 Triumph Sprint ST 1050  - Add me on Facebook

John Stenhouse

It's not three starts, it's three heat cycles. Start from cold run it til warm, fan cuts in and then shut it off. That three times shuts off the light if and only if the fault has gone!
Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

EvN

Thanks for the reply's. There was to much air in the system. The light is off.