steamer bits in uk

[ram33]

after collecting the bits from Gr8t_Feb13 (thanks again) ref this post :
http://www.tigertriple.com/forum/index.php/topic,13027.0.html
these are the bits available
please only ask if you need the bits, as hording may stop someone who really needs them from riding their bike
the parts are free for collection (near m1 j25) or subject to p&p

small after market screen (gone)
haynes manual - triumph triples & fours 91-95
2 coils (keeping the 3rd as mine is cracked) (reserved for Geoff W)
battery strap
pillion footrests inc brackets (reserved for Geoff W)
engine covers: clutch cover / r/h crank cover / l/h crank cover
all have a bit of paint blistering
new exp tank to thermos pipe T3620305
set of used engine bolts (not sure if complete or not - were removed to replace with allen bolts)
back rack - metal tube type - not the alloy cast one
sump guard
there was an ign pick up but i found mine had been cut and spliced and wire is very stiff all along so until mine is running i dont know if it works so this maybe available later.
there will also be a few body panels later when i sort as i will be changing mine over

[Geoff W]

Greetings Ram, yes I could use the coils and pillion footrests. Your need for the pickup coil sounds greater than mine. When I can sort out some time off, I will pop down the M1 to pick the bits up. Please PM me to let me know what sort of day/time  suits you.

[Geoff W]

PS many thanks to GR8.

[ram33]

Greetings Ram, yes I could use the coils and pillion footrests. Your need for the pickup coil sounds greater than mine. When I can sort out some time off, I will pop down the M1 to pick the bits up. Please PM me to let me know what sort of day/time  suits you.

pm sent