Centre stand sump bracket Question

[97tiger885]

Your a star. Thank you.
That gives me all I need to know.
On a side note, the tension spring looks to have little "stretch" in the photos,
does your stand snap firmly into up position?.
Regards Phil

The stand snaps firmly into up position and stays, even over bumps.

The spring(s) and arm must have come with the stand.  Maybe the bracket too.  I don't remember if the bracket  was there on the mc or if it came with the stand. There was no stand when I got the bike.

[nickjtc]

Just a rough freehand as I don't have Acad on this machine yet.

Maybe this should be 'stickied' for future reference...???

[Sin_Tiger]

Did you manage to get it fixed Phil?

[London_Phil]

Yep, fixed now, thanks for everyone's  help and Input.

My original bracket was about right with regard to the spring pin, but the tension was poor in my opinion.
I redid a bracket with the pin moved about 1cm to the front, and the springs, once I got the buggers on, are nicely tensioned, and the stand springs home with good tension.
The parts I bought were definitely Tigger ones, so I suppose unless we all report back with the pull tension of the stand, it may be my springs were tired.
I will post some pics when I get a moment.
On my shakedown run , on Monday, everything stayed nicely in place, except for the glass tube fuel filter which parted company as I pulled into J+S Watford.
2 bikes in the car park, and the Triumph's the one in bits, after leaving a large deposit!!!!, oh the shame

[London_Phil]

Pictures.. moved the mount screw forward to get more tension on the springs when stand is docked.