engine bits.

[rybes]

im off to england on saturday for 2 days so ill be usin that time to transfer the internals from the grey engine i bought before i left into the black engine cases. ive never taken a tiger engine completely apart before so apart from the obligitary gaskets what else do i need to build an engine ? sealers, thread lock etc.  then i can get it all ordered so its ready to start n hopefully finish in a day 

[Mustang]

the only special tools for the engine are the valve shim tool and the clutch anti rotation tool , but you can make one of those by bolting a steel and fiber plate together
don't forget a tube of blue hylomar to seal the cylinder bases

[rybes]

right blue hylomar it is. what about where the engine cases bolt together, does that need anythin ?

[Mustang]

the hylomar should do just fine !

although I use yamabond engine sealer , it's grey in color and eerily similar to what's there already
three bond 1194 is the same stuff as yamabond , also threebond or yamabond are easier to spread and don't dry as quick .
they stay elastic which makes an excellent case half sealer

[rf9rider]

Good luck with that mate. 

[Bixxer Bob]

I'll be over Monday to do the QA checks.... 

[rybes]

hmm mwonder if i can get threebond in norwich ?

[threepot]

I'll send you a pot of Laverbread 

[rybes]

just such a shame im alergic to gluten or idve had some