red oil light flickered on, bike died while riding

[raiderone]

Went out for a short ride in the evening rode maybe 15 minutes bike running great, I go to make a left turn to head home and the bike dies like I hit the kill switch no warning, sputter, nothing. The red oil light comes on and now the bike will not start again and the red oil light is staying on. What do I need to check first? Before I drag it to the dealer 75 miles away.

Thanks raider

[fraserdog]

I don't think the red oil light has any bearing on the problem as it will come on when the engine stops,similarly it won't go off until the engine starts as it is a pressure warning light.Someone more experienced than me will probably be along soon to give you pointers to the underlying problem of the non starting issue.

[HockleyBoy]

Start with a look at the ignition wiring, there have been a number of Tigers which have suffered corrosion/breakdown of the solder here. Being as it was sudden a wire may have come adrift.

[Sin_Tiger]

I don't think the red oil light has any bearing on the problem as it will come on when the engine stops,similarly it won't go off until the engine starts as it is a pressure warning light.

Being as it was sudden a wire may have come adrift.

Start with the basic stuff, is your battery voltage good, unlikely to have any bearing on this but at least you know what sort voltage you should be getting as you go down the line with checks.

I go to make a left turn

That is very suggestive of a cable connection fault as the previous posters mention.

[raiderone]

The battery is brand new and stays on a battery tender when I am not riding. I will look for broken wires and loose connection over the weekend. Where would be the best place ti start my search for broken connections?

[Mustang]

The battery is brand new and stays on a battery tender when I am not riding. I will look for broken wires and loose connection over the weekend. Where would be the best place ti start my search for broken connections?

start at the key switch ,as thats probably where the fault is , it is usually broken solder contacts inside the key switch housing .

[NortonCharlie]

Does the starter turn the engine over and it just doesn't fire?

Do your normal lights (neutral and such ) come on when you use the ignition switch?

Can you hear the fuel pump cycle on when you turn on the key?