News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Tank sealing

Started by threepot, February 07, 2013, 10:43:26 PM

Previous topic - Next topic

threepot

Has anyone used 3M's  Scotch-Clad 776 to seal a plastic tank? Its used in the aircraft industry. Avail on ebay,tempted to give it a try?
95 Super111
96 Tiger

Joe Bates

Used JB Weld Marine on a hole that happened while fixing spinning tank nuts.
It's been a few months and when I say hole I mean hole.
I let it cure for 2-3 days before adding fuel.
Thanks For Your Time

London_Phil

I assume you are just "lining" the existing tank, not repairing a leak?

These guys have a respected line of products.

http://www.caswelleurope.co.uk/gastank.htm

I've not used them, but they are a respected name  in the classic car arena