tyers

[tonytiger]

 Hello just put anew rear tyer on my wifes vesper, is there a nack to tubles tyers I can'nt get the tyers to sit properly to get any air in them.

[Chris Canning]

I'll assume you have a decent compressor at the very least around 25liters,if you haven't then you've not a hope.

Either stand the wheel upright and put pressure on the tyre to seal it to the rim and if that fails lie the wheel flat and put a rachet strap around the tyre and rachet onto the wheel then put the airline on the valve.

[JayDub]

Wot he ↑ said... take the wheel to a petrol station and use their machine 

[Sin_Tiger]

  make sure you remove the valve core try inflating to prevent restricting the air up.  A little washing up liquid helps the carcass slip over the bead rib if you don't have any proper bead soap.

[tonytiger]

I'll assume you have a decent compressor at the very least around 25liters,if you haven't then you've not a hope.

Either stand the wheel upright and put pressure on the tyre to seal it to the rim and if that fails lie the wheel flat and put a rachet strap around the tyre and rachet onto the wheel then put the airline on the valve.

Yes it's 25ltr 9.5 cfm thanks

[tonytiger]

Wot he ↑ said... take the wheel to a petrol station and use their machine 

Tried that one their machine was not working

[tonytiger]

make sure you remove the valve core try inflating to prevent restricting the air up.  A little washing up liquid helps the carcass slip over the bead rib if you don't have any proper bead soap.

Thank You Sin

[tonytiger]

 :5mopedDone thanks for words of wisdom