Chain guard

[Misterplant]

Any one got a chain guard for a wire wheel 955 Girly? I've got a perfectly good hugger chainguard fitted,but I want to try lowering the bike and can't do that with the hugger

[mat-tiger1]

Sorry, only just seen this. I fitted my 955I with a hugger before I px'd it for my Xcx, I'm sure the standard chain guard is still around somewhere. 
If I can dig it out you're welcome to it! Give me a day or two & I'll get back to you.

[Misterplant]

Thanks for the offer Matt,but I think yours was an 05 cast wheel tiger? The wire wheel model has different chain guard mounting points...and Chris canning has one he has agreed to sell me.i don't want to upset him,but if yours is the right one AND free il be right there 

[mat-tiger1]

No problems Misterplant.  I've attached a photo of the guard anyway (off-cut of decking optional extra. :icon_wink:)

I also have a pillion seat available if you needed one? 

[Chris Canning]

Thanks for the offer Matt,but I think yours was an 05 cast wheel tiger? The wire wheel model has different chain guard mounting points...and Chris canning has one he has agreed to sell me.i don't want to upset him,but if yours is the right one AND free il be right there 

Don't worry about upsetting me 😀 if you can get a freebie good luck to you.

[Misterplant]

No problems Misterplant.  I've attached a photo of the guard anyway (off-cut of decking optional extra. :icon_wink:)

I also have a pillion seat available if you needed one? 

Thanks mat.ive compared yor chain guard pic to Chris's and there seem to be only minor differences.if I can be a pain in the wot sit,could you measure between front and rear mounting points?
I can check that against my swing arm and if the measure corresponds,then yes please,I'd like it.

[mat-tiger1]

No worries Misterplant. Here you go, mounting hole centres measure out at approximately 38cm (15")

[Misterplant]

Well that's a bugger..I've measured and remeasured and can't make it any more than 35cm on  mine  oh well,that's another small item of information that may come in handy to someone!
Thanks for your time and effort Matt...guess I'd better be extra nice to mr canning again  :icon_wink:

[mat-tiger1]

No problem Misterplant, happy to help! 
If anyone else out there in TT land wants the chain guard & pillion seat just let me know!  :icon_wink: