News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Chain rubbing block ideas and UHMW tape for swingarm protection

Started by gcloys, June 29, 2023, 03:01:21 PM

Previous topic - Next topic

gcloys

Great info thanks!  I'm down in the Smokies and I'm still getting some riding in as it tops out about 60F.  I also curved mine a bit around the backside of the clamp with heat.  I had the same chattering noise, but it has quieted down now too.  I also had lower mileage, about 38mpg, but my last long ride I averaged about 40mpg. I chalked it up to my throttle hand, although I did turn down my idle closer to the recommended 1050rpm from about 1200rpm that I used when riding more technical dirt/gravel in the mountains. I'll keep this post up to date on wear and mileage.