News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

crash bars...

Started by tattyTigger, May 27, 2008, 01:16:18 AM

Previous topic - Next topic

tattyTigger

can't find them anywhere..was looking for some Hepcko Becker engine bars really, anyone know anywhere that still has some in stock?

Stretch


pit0rz

doh. never mind!  Wrong bike!
Steve P.
'03 Tiger - Luci

John Stenhouse

Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

John Stenhouse

Those look like Hepco and Becker ones too..............hang on I'll have a surf
Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

John Stenhouse

Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

nightrunner

This was years ago but I went straight to the H&B web site and found a link to info for the U.S. distributor.  If I had it all to do over again I would go with Thunderbike bars though.  The H&B's will protect the tank if the bike tips in a parking lot or perhaps a low speed laydown, but I think those band iron mounts are going to buckle if hit hard.   Someday (if it ever gets here) I hope to weld gussets on to those lounts or replace with tube steel.  JMHO FWIW.
Scott

Seeking adventure and peril

tattyTigger

thanks for the links, just gotta raid the piggy bank first  :oops:

...they should make the old girl look a tad meaner huh?


tattyTigger

Quote from: "John Stenhouse"Only other ones I could find are TM ones here:
http://www.tm-accessories.de/shop/produ ... 9b32fb7760

anyone dealt with these guys?, tried to confirm their price, seems very cheap even given the cr@ppy exhange rate, but they haven't come back to me  :?

...maybe I shoulda tried emailing them in German  :lol:

John Stenhouse

I bought their bars for the Girly, but I got mine through Jack Lilley, so not much help then :oops:
Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

Hooligan

Eurotech Motorsports
1017 Willow Ave
Chico, CA.95928
Tel.: + 1 530 345 7145
Fax: + 1 530 345 7138
eMail: www.eurotechmotorsports.com
96 Steamer
07 KTM 950R SE
05 KTM 450 EXC
06 KTM 85 SX
09 KTM 105 SX

harre

www.aaa-triple-a.de also have the H&B crash bars. Cannot say if they are reliable, I have not bought anything from them. I have tried www.polo-motorrad.de which I find very good. I have their tank case on my Steamer (Pharao Enduro Riemen Dakar, about $65), works really well. I think they also can supply the H&B crash bars even though you cannot find it on the web shop, and while you're at it you might look at the TRAX alu-cases.

John Stenhouse

Cool, new sites to look through! have to polish up my german though :lol:
Black 885i Tiger UK based
Orange 955i Tiger Canadian based
Norton 961S never got it, tired of waiting

geno955i

hi,
  hepco bars available for steamer on ebay,got mine 4 mths ago,
bikes are for life..cars are just obstacles..
___________________________________
94 steamer..been all over europe road surfing
05 yamaha tt600re...now supermotod
drz400e for bog hopping

tgrrdr

I don't remember how much they cost years ago when I got them but the Thunderbike bars [/color] are pretty nice. Not sure if I'd pay $495 for them though.

Bill Bornman 98BRG 05
N37-57.7 W122-05.0