Request: Parts and Accessories info

[abruzzi]

I'm putting together a list of accessories still available for the steamers.  Please post any and all information you have.  I'm especially interested in sources for Triumph accessories.  Is anything they made still available, and do any retailers sell their stuff?

Anyway, post anything you have to this thread, and I'll link to the page, once I have a rough page up.  The stuff I already know about:

Thunderbike stuff
SW-Motech Center Stand
Hepco Becker luggage mounts, and crash bars.

Anything else still out there?

thanks,

Geof

[JetdocX]

Nology coils

umm....the aftermarket for this bike is not much. :(

[Mustang]

Nology coils

umm....the aftermarket for this bike is not much. :(

Don't forget Nology has Hotwires plug wires .
Ebc sells brake rotors for it .
I have seen wave brake rotors on Ebay UK for the steamer

These guys have some steamer stuff
http://www.triumph-online.co.uk/tiger-900-92-98-carb-model-26-c.asp
they have Hagon shocks and springs  ,gps mounts , windshields , adjustable brake and clutch levers
and twisted Throttle has some stuff

there never was much available for the steamers in the aftermarket in the first place , especialy here in the US

The # of bikes imported to US was not that many for aftermarket companys to even care

Just goes to show that a MANLY bike don't need no stinking farkles

[Mustang]

JC Whitney has EBC Pro lite rotors for the front of a steamer
http://www.jcwhitney.com/EBC-PRO-LITE-REPLACEMENT-ROTORS/GP_2016169_N_111+1998+200730547+600014438_10111.jcw

[Mustang]

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=181576&store=Main&catId=4&productId=p181576&leafCatId=&mmyId=13938
Dennis Kirk has pingel adapter plates that will let you use one of their gas petcocks on a steamer , it will also work with any 3/8ths NPT petcock

Dennis Kirk also has 48 tooth JT steel sprockets for the rear
as well as EBC brake pads

[Mustang]

CORBIN SEATS
you can still get a Canyon Dual Sport seat brand new from Corbin
http://www.corbin.com/triumph/tiger.shtml

[Mustang]

K&N air filters
although you run the risk of ingesting fine dust .............ever wonder how a K&N can flow 50% more air !

[Mustang]

I'm especially interested in sources for Triumph accessories.  Is anything they made still available, and do any retailers sell their stuff?



Geof

Doubtful that any retailers have anything for the Triumph Accessories as they were a Dealer only item .

And as far as Triumph Accessories the only things they ever had when the steamers were new was a snow shovel skid pan , heated grips , fender extenders ,center stand , progressive springs for front forks ,and Givi Monokey luggage rack

[Mustang]

Bagster still makes tank covers for it , they have black , red or green
http://www.bagster.com/en/catalogue-moto.php?id_moto=1457

[JetdocX]

Who makes the 5 degree timing advance plate?

[Dr. Mordo]

Factory Pro makes the carb performance kit, they sell needle jets and I believe they also make the timing advance kit.

[abruzzi]

thanks guys.  I know there isn't a lot, which is why I figured it would be helpful to list the stuff in one place.  Girlies still have some presence at shops like twistedthrottle, Touratech, and such, so they don't need a list near as much.  I should have a page up in a day or so.

Geof

[Dr. Mordo]

Another thing to mention is probly Sasquatch's shock rebuild service, which is a fantastic deal for a Steamer owner.

[abruzzi]

Still under construction, but here is the page:

http://tigertriple.com/wiki/index.php?t ... er_Farkles

Geof

[Mustang]

Still under construction, but here is the page:

http://tigertriple.com/wiki/index.php?t ... er_Farkles

Geof