Triumph screw up

[Brit/Man]

This is how thay were going to fix my bike and that for a Triumph work shop hard to believe  :roll: , I just hope the 2nd hand cam`s OK

[blacktiger]

This is how thay were going to fix my bike and that for a Triumph work shop hard to believe  :roll: , I just hope the 2nd hand cam`s OK

They've never heard of a Helicoil thread repair then?

[Brit/Man]

Well had to go back to the shop as my baby had a leak, after two hour`s I got here back :)

[rybes]

next time your in there check their changin room for stetsons n cowboy boots  :roll:
how far are you from the danish border ? i momved here jus before xmas. ill be visitin bergen in the summer so if ya up for a ride out let me know

[Brit/Man]

HI, I Live km 20 south of Dortmund so if you come dowen drop me a line :D

next time your in there check their changin room for stetsons n cowboy boots  :roll:
how far are you from the danish border ? i momved here jus before xmas. ill be visitin bergen in the summer so if ya up for a ride out let me know

[Brit/Man]

Well she`s back in the garage as she still leaks :x

[rybes]

you wanna try jus seein if you can tighten up the jubilee clip. might be all it is

[Brit/Man]

you wanna try jus seein if you can tighten up the jubilee clip. might be all it is

Jup did that not to tight but not to slack, but as she did`nt have this prob
when I took her in the first time and this is the second leak check back to the root`s .  Did have a up side to it all I have now have my second Bonneville to ride :D free of cost from the shop :P

[Brit/Man]

Picked her up yestreday :D  , I`am setting off for the German TIGER meet up this weekend :D  and hope she`s OK

BFN JOE :D

[metalguru]

It seems unbelieveable to me that an 'engineer' can carry out a repair to the camshaft sprocket mounting and with no sign of a locking device/ threadlock, or at least peined so the nut does not move. Seems they could have cross threaded it at the stealers as if it was loose inside the engine it wouldn't be too long before you saw it milling its way from the inside out.!!! Let along the nut resting on an uneven surface, ( no grip).

[Brit/Man]

It seems unbelieveable to me that an 'engineer' can carry out a repair to the camshaft sprocket mounting and with no sign of a locking device/ threadlock, or at least peined so the nut does not move. Seems they could have cross threaded it at the stealers as if it was loose inside the engine it wouldn't be too long before you saw it milling its way from the inside out.!!! Let along the nut resting on an uneven surface, ( no grip).

And he was the chief mechanic :roll:
But we had a nice weekend here in Germany at the Tiger meeting and she ran well :D

[rybes]

damn, i was on me way back from england with me tiger. if it was a week or 2 later idve tried to make it down  :D

[chairhead]

But we had a nice weekend here in Germany at the Tiger meeting and she ran well :D

Any other photos from this meet?,where was it
how many turned up,was it over the weekend,did you camp or B&B,
was there a rideout,was there a stripper :roll:  :lol: only joking,
maybe the date should be noted for next year and a few of us could get across :roll:

[Brit/Man]

But we had a nice weekend here in Germany at the Tiger meeting and she ran well :D

Any other photos from this meet?,where was it
how many turned up,was it over the weekend,did you camp or B&B,
was there a rideout,was there a stripper :roll:  :lol: only joking,
maybe the date should be noted for next year and a few of us could get across :roll:

Any other photos from this meet? not from me but I will see what I can do.

Where was it, www.villa-loewenherz.de  it`s the first weekend in april, it is an old Villa and I stayed for two nights with B&B + evening meal buffe lot`s to eat + 7  1/2 ltrs of shandy and 2 beer`s for € 70.

Was there a rideout, lot`s thay also had 3 new 800 Tiger`s for test ride`s
that whent dowen well I did`nt take one out as I love my lass :D

How many turned up, around 30 bike´s Tiger´s and of corse one or two BMW
well thay are German :)  and a KTM or two well some has to ride them :)

Hope this was some help
all the best joe

[Brit/Man]

Here`s one my baby is in the back ground 8)