Appreciate advice on renthal pro taper handlebar fit & simular bend as stock for 955i. Thanks, Gary.
:idea:
If I recall correctly , unless you are using bar risers you will need to get handlebars that are an 'ATV' bend.
On the steamers you need to use an ATV bend also ,or bar risers .
On 1 of my steamers I have a 'CR HIGH' bend but am using an 1 3/4 inch bar riser also .
For my 01 Tiger, I got the ATV Mid Pro Taper bar. I also use 2" risers. You will have to figure out a way to screw your bar ends since the Pro Taper does not have built-in bolts like the OEM bars. You will also need to to drill holes in the bars for the starter and turn signal seitch assemblies. If you have heated grips, you iwll need to drill holes for them too.
I like the Pro Taper bars more then the stock. They give a more aggressive riding postition and more comfortible for riding while standing.