- Welcome to TigerTriple.com.
For the Tiger(s)
News:
Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.
Recent posts
#1
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by Sin_Tiger - March 23, 2023, 10:47:28 PMI think if you follow the basis of Mustang's old design (as Lee has shown) with the inherent flexibility, you should be fine. With the Genuine tool (I have and have used both) it's not as easy to find the sweet spot to trap the bucket.
The only comment I'd make is that if I had to make one, or replace a part, now, I'd make the pins from steel as the shoulders on the alloy ones can get damaged.
The only comment I'd make is that if I had to make one, or replace a part, now, I'd make the pins from steel as the shoulders on the alloy ones can get damaged.
#2
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by London_Phil - March 23, 2023, 07:36:25 PMThere were drawings on this site from a long time ago, but they look like they did not survive the crash and restore..
#3
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by bazza5938 - March 23, 2023, 07:33:11 PMQuote from: Lee337 on March 23, 2023, 06:44:06 PMok, it's not great, but there may be enough for you to fabricate something.
I'm afraid Its a long time since I've done any tech drawings, so photos will have to do.
Could you grab the distance from the short edge for the mounting holes? And the diameter of the legs that push down on the buckets, along with the indent, if you can. And the sizes you have there for the holes, are they to centre of holes, or the edges?
#4
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by Lee337 - March 23, 2023, 06:44:06 PMok, it's not great, but there may be enough for you to fabricate something.
I'm afraid Its a long time since I've done any tech drawings, so photos will have to do.
I'm afraid Its a long time since I've done any tech drawings, so photos will have to do.
#5
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by bazza5938 - March 23, 2023, 02:35:40 PMQuote from: Lee337 on March 23, 2023, 11:00:48 AMFair enough, If I remember I'll dig mine out & measure the bits.
That would be great, much appreciated
#6
Tiger 800's (2010 - 2020 Tigers) / Re: Talyn's Diary
Last post by London_Phil - March 23, 2023, 12:51:41 PMhttps://photos.app.goo.gl/XEQvQjKcLQ1sWxpR9
Mount hardware for the relocation is mine, not the kit. I only got the side repeaters
Mount hardware for the relocation is mine, not the kit. I only got the side repeaters
#7
Tiger 800's (2010 - 2020 Tigers) / Re: Talyn's Diary
Last post by Sin_Tiger - March 23, 2023, 11:45:35 AMNice job 
vynil or hand painted?
That's a neay kit Phil, that person looks like the kind that will come up with product solutions for other issues / bikes, so that's a boolmark
vynil or hand painted?That's a neay kit Phil, that person looks like the kind that will come up with product solutions for other issues / bikes, so that's a boolmark
#8
Speaking Of Bikes... / Re: Valve Adjustment Tool (T38...
Last post by Lee337 - March 23, 2023, 11:00:48 AMFair enough, If I remember I'll dig mine out & measure the bits.
#9
Tiger 800's (2010 - 2020 Tigers) / Re: Talyn's Diary
Last post by Lee337 - March 23, 2023, 10:59:35 AMYep, been looking at those recently - still undecided though. Maybe next month after I've been paid
#10
Tiger 800's (2010 - 2020 Tigers) / Re: Talyn's Diary
Last post by London_Phil - March 23, 2023, 09:48:27 AMLooks good
Just a comment on indicators.
A while ago I fitted LED ones from later bikes, with a solid state relay, and recently got the 3d printed inserts with lights from ADVmoto https://www.advmoto.co/about
Lifts the fronts to a better location, and the infill light looks good, and increases indicator visibility.
Would recommend. ( he actually sold me just the light inserts, and I made up the rest, but the whole kit wasn't much more expensive, and his wiring is better than mine...)
Just a comment on indicators.
A while ago I fitted LED ones from later bikes, with a solid state relay, and recently got the 3d printed inserts with lights from ADVmoto https://www.advmoto.co/about
Lifts the fronts to a better location, and the infill light looks good, and increases indicator visibility.
Would recommend. ( he actually sold me just the light inserts, and I made up the rest, but the whole kit wasn't much more expensive, and his wiring is better than mine...)
Running a forum, unfortunately, is not free. The TigerTriple forum needs servers, software licenses, bandwidth and much more. Please consider supporting the forum through a donation! I would really appreciate it. (A small recurring donation through this PayPal button would be even more awesome! 
)
)