TigerTriple.com

Marketplace => Bikes for Sale => Topic started by: Sin_Tiger on December 10, 2022, 05:23:58 PM

Title: Chilli Steamer 36K
Post by: Sin_Tiger on December 10, 2022, 05:23:58 PM
98% factory original,  stock, unmolested, no silly "accessories". Two matched keys .
Original Paint (Chilli Red Pearl) & Decals.
Original DID Rims, Indicators, Bars, Rack and End Cans
Original Seat base, re-covered (shaped a little lower and longer in rider area)
Most of the service paperwork from new.

Non Stock :-
Countless stainless fasteners and a considerable amount of powder coating
Fusebox repositioned (stock location is an awful faff)
LED Instrument backlights and Idiot lights (except Low Fuel)
Airbox cover split for ease of filter cleaning / carb removal.
Aftermarket "Folding" Mirrors
12V socket on left panel.
Heated Grips
Scottoiler

Recently had a frame up refresh after a long period in storage.
No rust or flaking coatings, nothing missing (Airbox cover panels present and intact), nothing broken or hingin' aff, no cracked panels or siezed screws. No cracks in the rear frame. Paintwork is not perfect, neither will it embarass you, it has had some touch up.
Tank is good with no paint bubbling, clear drain, no snapped off screws or spinning captive nuts.
Full swing arm off suspension rebuild, forks rebuilt with fresh oil and seals, shock rebuilt with new seals, oil, bumpstop and nitrogen.
Brakes & Clutch hydraulics completely rebuilt, including master cylinders, braided hoses.
Engine casing covers have been removed, including sump, cleaned out and recoated, textured powder coat like the original factory, not rattle can'd.
Drive sprocket (18/45), clutch rod and gear selector seals replaced, chain and sprockets less than 2k miles.
Valve clearances all in spec., near factory original shim sizes! No sprag clutch issues. Carbs cleaned, rebuilt & set up.
Electrics, PVL coils, fan good with new switch, both horns & side stand switch good. All Switchgear and Instruments fully functional, yes including the clock and low fuel sensor. Charges properly, Motobatt. Been on the Triumph diagnostics tester and comes up clean.
Side stand rebuilt with heavy gauge tubing, larger pad and bracket bushed, does not lean like a drunk Matlow.
All new bearings and seals, Anakee Tyres will see out a season unless you plan to tour all of the Alps.

Comes with colour matched Bagster tank cover and bag. If the sun shines, mileage shown will go up. More photos etc. if interested don't want to clog the website server.

Ride away info :-
Next service = @ 4400 miles
Next MOT = 12th September 2023
Rear Tyre = + 1200 miles from new
Title: Re: Chilli Steamer 36K
Post by: ghulst on January 28, 2023, 11:09:25 AM
You can post a couple of extra pics if you want. What is the reason you are letting it go?
Title: Re: Chilli Steamer 36K
Post by: Sin_Tiger on January 28, 2023, 11:35:46 PM
Thanks mate, I figured anyone interested will get in touch and save me cluttering up the server, I'm good at that  :augie

Simple reason, too many Steamers  :cp
Title: Re: Chilli Steamer 36K
Post by: ghulst on January 29, 2023, 04:52:50 PM
It looks like a great bike. Always liked the looks of the steamer.
Title: Re: Chilli Steamer 36K
Post by: Madruss on February 22, 2023, 10:52:31 AM
Very tidy  :icon_salut:
Title: Re: Chilli Steamer 36K
Post by: Sin_Tiger on February 22, 2023, 10:27:56 PM
Quote from: Madruss on February 22, 2023, 10:52:31 AMVery tidy  :icon_salut:

Thanks Russ, shipping might be a bit pricey  ;)
Title: Re: Chilli Steamer 36K
Post by: Madruss on February 24, 2023, 10:38:58 PM
Yes container prices ex USA  :BangHead, now just add a 0 on the end. Parcel freight was $25 now $125  :bug_eye
Looking a Tiger parts on fleabuy ex the fatherland (my $1200 Au tiger included shipping) parts value would be $6k or more   ;)
Title: Re: Chilli Steamer 36K
Post by: Aeschere on March 16, 2023, 03:00:34 PM
That is one nice looking bike! The new owner can be proud of it.
Just wondering, how did you keep those rims and spokes so shiny? They look brand new!

Perhaps some useful information to add: What is your asking price and where is the bike located?
Title: Re: Chilli Steamer 36K
Post by: Sin_Tiger on March 17, 2023, 10:57:05 PM
Thank you for the compliment. The rims were spare originals I'd had in storage for a long time, didn't do anything special, just a gentle polish, anything aggressive will damage the original anodising, then just a good quality wax.

I'd expect anyone who is seriously interested will contact me directly, most members know roughly where I am in Scotland. The price I have it listed more generally is a bit more than what I'd let it go to a forum member who gets in touch  ;)
Title: Re: Chilli Steamer 36K
Post by: Madruss on November 10, 2023, 09:43:41 PM
Has it sold yet ?
Title: Re: Chilli Steamer 36K
Post by: ghulst on November 28, 2023, 08:40:19 AM
Now there is a good question. Or perhaps Niall is still just riding around on it. ;) 
Title: Re: Chilli Steamer 36K
Post by: wyaTT37 on March 12, 2024, 05:39:13 PM
Curious minds want to know
Title: Re: Chilli Steamer 36K
Post by: Lee337 on March 12, 2024, 08:02:36 PM
He's not been active for 9 months  :icon_eek:
Title: Re: Chilli Steamer 36K
Post by: ghulst on March 12, 2024, 09:19:37 PM
Well, that is worrisome...
EhPortal 1.34 © 2024, WebDev