As above. Failed bulb fell out of holder after trying to remove with beak on.
Now lying under right reflector, between reflector and outer "glass"
Does the outer "glass" separate from the assy, or do I need to turn the bike upside down, and shake it?
Been there, done that Phil..
Bluetack and a wire coat hanger. :nod
If that doesn't work, you could try a piece of silicone hose with the other end stuffed into a shop vac sealed with duct tape.
Vacuum and small bore plastic tube via one of the headlamp bulb mounting finally got it out. Realised the beak really does cause the problem when the new one did the same after I tried to fit the new one... got the new one out with the vac, and now going to order a standard Osram long life, not the dodgy LED I was using....and remove the beak to fit it...
Sorry I forgot to state that you need to take the H4 out to get enough wiggle room :icon_redface: Glad you managed to get it out though :eusa_clap