Print Page - Throttle bodies vacuum tubes DIY

Title: Throttle bodies vacuum tubes DIY
Post by: tigergotcha on July 23, 2023, 09:11:32 AM

A good replacement for the OEM tubes(with rubber boots always cracking) are silicon tubes 6mm ID, 3mm wall thickness. If you want to keep the corrugated ones you can use pieces of the same silicone tube to just replace boots (it's a tight fit, perfectly working).WhatsApp Image 2023-07-15 at 12.18.55.jpegWhatsApp Image 2023-07-23 at 09.05.14 (1).jpegWhatsApp Image 2023-07-23 at 09.05.14.jpeg

Title: Re: Throttle bodies vacuum tubes DIY
Post by: Lee337 on July 23, 2023, 11:35:20 AM

I've replaced the ones on my Daytona with similar silicone hoses, just not red ones :icon_mrgreen:

Title: Re: Throttle bodies vacuum tubes DIY
Post by: HockleyBoy on August 09, 2023, 06:35:37 PM

:thumbsup

Title: Re: Throttle bodies vacuum tubes DIY
Post by: wyaTT37 on February 29, 2024, 09:58:30 PM

Quote from: tigergotcha on July 23, 2023, 09:11:32 AMA good replacement for the OEM tubes(with rubber boots always cracking) are silicon tubes 6mm ID, 3mm wall thickness. If you want to keep the corrugated ones you can use pieces of the same silicone tube to just replace boots (it's a tight fit, perfectly working).WhatsApp Image 2023-07-15 at 12.18.55.jpegWhatsApp Image 2023-07-23 at 09.05.14 (1).jpegWhatsApp Image 2023-07-23 at 09.05.14.jpeg

:><

Title: Re: Throttle bodies vacuum tubes DIY
Post by: Flyingwombat on March 03, 2024, 01:32:26 PM

Just done this myself after seeing a vacuum leak

TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: tigergotcha on July 23, 2023, 09:11:32 AM