News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

Recent posts

#1
Girly Talk (1999 - 2006 Tigers) / Re: non regular idle revs on 8...
Last post by Titus - April 30, 2024, 06:11:05 PM
I never had and never will have a efi bike, but on an efi car engine, most idle issues relate to the idle air control valve, engine temp sensor and/or air intake temp sensor, last but not least vacuum leaks around the iacv and tb. Best of luck and keep us posted.
I would try unplugging sensors one by one to see if anything changes. If unplugged the temp sensor usually make the engine run faster and richer so dont worry, map goes to a 50/50 emergency mode.
#2
Steamers (1993-1998 Tigers) / Re: Steamer with bad habbits
Last post by Titus - April 30, 2024, 05:10:43 PM
I will kill the old one with a hammer, hopefully it will get me closure.
Thank you everyone, this forum is a great place.
Will be active and help however I can !
#3
Steamers (1993-1998 Tigers) / Re: Steamer with bad habbits
Last post by London_Phil - April 30, 2024, 04:33:56 PM
Yessss. Nice result.
You are now the new official expert on Steamer CDi's lol... 
#4
Steamers (1993-1998 Tigers) / Re: Steamer with bad habbits
Last post by Titus - April 30, 2024, 04:28:13 PM
Update, CDI arrived, bike runs perfect. Lesson learned, although we measured everything, changes transistors, resoldered and all the good stuff, only thing that made it run was another cdi, arrived today and she purrs and revs like the beast she is.
She is in pieces but will put her back together tomorrow.
#5
Steamers (1993-1998 Tigers) / Re: Now to put it all back tog...
Last post by Madruss - April 28, 2024, 11:07:24 PM
I've done 200klm on rebuilt forks (seals, oil & gaiters) from a triumph workshop  :Topes :icon_frown:
Pss's me off, I have to strip it out of the bike again  :icon_mad: 
#6
thanks for the tip 🙂 will work on it
#7
Steamers (1993-1998 Tigers) / Re: Now to put it all back tog...
Last post by ghulst - April 27, 2024, 10:40:02 PM
True, but a great chance to upgrade the fork springs and change the oil as well. That transformed my steamer.
#8
Steamers (1993-1998 Tigers) / Re: Now to put it all back tog...
Last post by Madruss - April 27, 2024, 10:02:40 PM
It's not over :icon_cry:
Right side fork seal is shot, don't know why.
It's had a little seep but now the front suspension is as good as a Z 50 Honda. :icon_frown:
More spanner work before anymore riding :icon_mad: 
#9
Hey man, probably see my other thread, it's long winded but.

1. Battery - ensure charged and healthy
2. Fuel trims with TuneECU - make a note of the map, trims, and IACV settings before fiddling
3. Check all cylinders are firing at idle by turning it on and checking exhaust outlets for warmth (thermal camera or burn your hands methods are acceptable) - issue here could be spark plugs
3. Throttle cable adjustment and free movement - should not stick, best to do with tank off
4. IACV function, throttle body balancing and vacuum leaks - Sort any issues (loose balancing screws is a thing) If you see any backfiring into the throttle body then consider timing issues and valve clearances
5. Engine map - check it is up to date
6. Fuel pump test (listen for abnormal squealing), fuel pressure, injector function - replace injector seals (lubricated with engine oil) if injectors are removed, clean them at the same time.

Guides for most of these things are on here, or you can find on youtube (Delboys Garage has a whole section on Tigers). I would also download the 885i user manual for the right VIN too
#10
Girly Talk (1999 - 2006 Tigers) / Re: Surging at 3-4k RPM
Last post by Flyingwombat - April 26, 2024, 09:43:36 PM
Oh good. I'll get on with it then.

Hopefully no lasting damage.