TigerTriple.com

Marketplace => trash can => Topic started by: wakdady on August 07, 2011, 08:02:28 AM

Title: WTB: steamer rear fender
Post by: wakdady on August 07, 2011, 08:02:28 AM
On my newly purchased '96 I have just discovered the rear fender is broken in three pieces and the mounting brackets on the rearest part of the frame are broken off.

So i need a fender and hopefully I can find someone to weld those back on.
Title:
Post by: Mustang on August 07, 2011, 03:12:27 PM
bike bandit has them listed as available ................but you aint gonna like the price !

$285
Title:
Post by: rf9rider on August 07, 2011, 10:19:27 PM
Any of the following will fit, i looked into these when looking for one for my rebuild project.
Have a look on Ebay  :)

1990 Triumph DAYTONA   
1991 Triumph DAYTONA   
1991 Triumph TROPHY   
1992 Triumph DAYTONA   
1992 Triumph TROPHY   
1993 Triumph SPRINT CARBS
1993 Triumph TIGER   
1993 Triumph TROPHY   
1994 Triumph SPEED TRIPLE
1994 Triumph SPRINT CARBS
1994 Triumph TIGER   
1994 Triumph TROPHY   
1995 Triumph DAYTONA   
1995 Triumph SPEED TRIPLE
1995 Triumph SPRINT CARBS
1995 Triumph TIGER   
1995 Triumph TRIDENT   
1995 Triumph TROPHY   
1996 Triumph DAYTONA   
1996 Triumph SPEED TRIPLE   
1996 Triumph SPRINT CARBS
1996 Triumph TIGER   
1996 Triumph TRIDENT   
1997 Triumph SPRINT CARBS
1997 Triumph TIGER   
1997 Triumph TRIDENT   
1998 Triumph SPRINT CARBS
1998 Triumph TIGER   
1998 Triumph TRIDENT
Title:
Post by: wakdady on August 08, 2011, 12:04:19 AM
now thats what im talkin 'bout!!!!
thank you so much for the info!
i was able to find one on ebay for a fraction of retail.
Title:
Post by: rf9rider on August 08, 2011, 01:01:57 AM
No worries, i got mine off Ebay for 99p! Thats $1.60 to you.
Title:
Post by: Mustang on August 08, 2011, 01:15:09 AM
Keep in mind that although the fenders are the same there are actually two versions for the different mountings of the coolant reservoir
serial #20131 and lower use threaded inserts molded into the fender
serial #20132 and up just have holes where the reservoir is pop riveted on
Title:
Post by: wakdady on August 08, 2011, 01:53:10 AM
Quote from: "Mustang"Keep in mind that although the fenders are the same there are actually two versions for the different mountings of the coolant reservoir
serial #20131 and lower use threaded inserts molded into the fender
serial #20132 and up just have holes where the reservoir is pop riveted on

yeah, i noticed that. but i figure i'd rather take a chance than spend $300 on a new unit. hopefully luck is on my side.
EhPortal 1.34 © 2025, WebDev