i know ebc HH pads are the best but whats next best ? reason i ask is, i dont wanna go spendin money on a set of pads that will only be in a few more weeks. got a 3 spoke conversion to do and ill save HHs for that. dont wanna go buy cheapys and not stop with pillion and luggage on board ya see :wink:
Quote from: "rybes"i know ebc HH pads are the best but whats next best ? reason i ask is, i dont wanna go spendin money on a set of pads that will only be in a few more weeks. got a 3 spoke conversion to do and ill save HHs for that. dont wanna go buy cheapys and not stop with pillion and luggage on board ya see :wink:
are you changin the brake calipers when you do the three spoke wheels ?otherwise use the hh pads now and they will work fine with the three spokes
yeah i am mustang. got some 4 pot ones comin with a loada bits off Rob. unless they fit them ?
over here I can get EBC HH from a guy on ebay for 19 dollars a set .......cheap enough IMHO!
your pads cant make it a couple more weeks till you change to 3 spokes ?
nah,i got bout 4mm left on em :( was lookin at those goldfen ones but think someone on here said they were crap ?
Erm, isn't 4mm about half a pad??
yeah i spose it is :lol: nevermind, i got loads left then :)
Where are you guys buying brake pads? $33 shipped for EBC rear pads on eBay. Bike Bandit listing for rears is no longer. Thanks in advance.
http://cgi.ebay.com/ebaymotors/TRIUMPH- ... 4aaf390c71 (http://cgi.ebay.com/ebaymotors/TRIUMPH-Tiger-900-Rear-Brakes-Pads-93-01-/320767331441?pt=Motorcycles_Parts_Accessories&hash=item4aaf390c71)
i ended up puttin those goldfren in mine. went to the mot and got told theyd need changin. when i got the pads out what was left of the linin drop off the backin plate :shock:
they dont seem to bad but they wernt impressed with a lot of up n down hill ridin the other weekend. they tended to fade quick. otherwise for normalish ridin they are fine.
Quote from: "garrett"Where are you guys buying brake pads? $33 shipped for EBC rear pads on eBay. Bike Bandit listing for rears is no longer. Thanks in advance.
http://cgi.ebay.com/ebaymotors/TRIUMPH- ... 4aaf390c71 (http://cgi.ebay.com/ebaymotors/TRIUMPH-Tiger-900-Rear-Brakes-Pads-93-01-/320767331441?pt=Motorcycles_Parts_Accessories&hash=item4aaf390c71)
you aint looking hard enough
This guy is a great seller used him before
he has the 215's also
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 1423.l2649 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170394792000&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
Thanks. I shot him a message as I didn't see 215s listed.
Even cheaper for EBC. http://cgi.ebay.com/ebaymotors/Front-br ... 56462b407b (http://cgi.ebay.com/ebaymotors/Front-brake-Pad-Triumph-Speed-Triple-Daytona-Sprint-EBC-/370544427131?pt=Motorcycles_Parts_Accessories&hash=item56462b407b)
What is the difference between the 215 and 214s?
I bought a set that were suppose to be rears, but they sent me FA 196 (these are for later Tigers I think). The 215s went on easy peasy.
Quote from: "garrett"What is the difference between the 215 and 214s?
I bought a set that were suppose to be rears, but they sent me FA 196 (these are for later Tigers I think). The 215s went on easy peasy.
214 and 215 are left and right for front
technically the 215 for the rear is a 215/2 it has a little thinner brake lining
you can use a plain 215 on the rear easy enuff also
Yeah I was a little confused when I got the 215s. Since I got the wrong pads for the rear, I tossed the 215s on the back and then wondered why I didn't get more sets of them. haha