Print Page - Few more Girly bits(Update)

Title: Few more Girly bits(Update)
Post by: Timbox2 on September 21, 2011, 06:48:01 PM

The clearout has started, postage on top of prices please.

All from ally wheel Girly, though pretty sure these bits cover all years.

Baglux Tank cover Orange/ Silver Stripe £50-00
MRA Screen £30-00 Sold
As Tiger triple found out, and I forgot, this screen was badly scratched but I restored it using a screen repair kit, you will not be able to tell, I guarantee it, but only fair to point that out, Ive dropped the price £5, but these screens retail over £100 now and regularly go for £50-£60 on ebay.

Frt Wheel bearings(SKF) and seals(Gen Triumph) £20-00
Throttle cable New £15-00
Clutch cable Used spare £5-00
SW Motech 30mm Risers Silver £20-00 Sold
Gen Triumph Valve Tool £25-00 Sold
Pair Inner Pannier bags, but no carry straps. £10-00 Sold

**Found something else**
Lucifer Orange sport screen, but, modified, I drilled 2 holes so I could use my Touratech Headlight guard with it, make me an offer, picture below
(http://i55.photobucket.com/albums/g132/cockneytaff/Tiger/20110921_0676.jpg)

PM me if interested.
I'll take photos if requested, cheers.

Title: MRA Screen
Post by: Tigertriple on September 21, 2011, 07:40:58 PM

Interested in your MRA screen PM sent

Title:
Post by: chinchliffe on September 21, 2011, 10:01:28 PM

Interested in the valve tool, how can I get payment to you? Paypal?
Chris

Title:
Post by: rf9rider on September 21, 2011, 10:39:14 PM

Might be interested in the bar risers, can you put up a photo?

Title: Valve tool
Post by: chinchliffe on September 22, 2011, 01:00:25 AM

Thats fine, just let me know who you want it payable to, total amount with postage and your address.

Chris

PS It won't let me pm you through the message section.
My email is hinchliffe@ntlworld.com

Title:
Post by: Timbox2 on September 22, 2011, 07:04:04 AM

Quote from: "rf9rider"Might be interested in the bar risers, can you put up a photo?

PS: I fitted these but after just 2 days decided I prefered the bike without them.The instructions show little plastic caps to go in the top of the bolt heads, I never had them?

(http://i55.photobucket.com/albums/g132/cockneytaff/Tiger/20110922_0684.jpg)

Title: Re: Valve tool
Post by: Timbox2 on September 22, 2011, 07:04:58 AM

Quote from: "chinchliffe"Thats fine, just let me know who you want it payable to, total amount with postage and your address.

Chris

PS It won't let me pm you through the message section.
My email is hinchliffe@ntlworld.com

Got your PM Ive replied, but heres a photo anyway.

(http://i55.photobucket.com/albums/g132/cockneytaff/Tiger/20110922_0686.jpg)

Title: Re: MRA Screen
Post by: Timbox2 on September 22, 2011, 04:15:24 PM

Quote from: "Tigertriple"Interested in your MRA screen PM sent

Heres a pic, still not brilliant, difficult photographing perspex, there are some very minor impact marks, but they wont show up

(http://i55.photobucket.com/albums/g132/cockneytaff/Tiger/20110922_0691.jpg)

Title:
Post by: rf9rider on September 23, 2011, 02:53:54 AM

I`ll have the risers mate, i`ll PM you.

Title:
Post by: rf9rider on September 26, 2011, 11:54:45 PM

Risers arrived this morning, thanks mate :D

Title:
Post by: Timbox2 on September 26, 2011, 11:55:39 PM

Quote from: "rf9rider"Risers arrived this morning, thanks mate :D

Pleasure, and thanks

TigerTriple.com

Marketplace => trash can => Topic started by: Timbox2 on September 21, 2011, 06:48:01 PM