washing the bike today and noticed the exhaust guard was loose, the screw on the underside had worn a large hole in the aluminium guard.
sorted it with a washer. Perhaps over xmas i should see about replacing it.
anyone else come across this problem....er....er.... i mean an opportuniuty to fit a modified sump guard.
your kidding me, a new one is £230 wtf item 22
http://www.worldoftriumph.com/triumph_m ... _03=232917 (http://www.worldoftriumph.com/triumph_motorcycle_parts_locator.php?block_01=&block_02=1000171&block_03=232917)
Holy moley! They gotta be kiddin !! Is that 222 a misprint ? should be 22 perhaps?
OOPs - meant 229.
I know i was shocked i rounded it up from 229 to 230 :D , for a few quid more I could get a touratech sump guard
http://www.touratech.com/shops/008/prod ... 093342af95 (http://www.touratech.com/shops/008/product_info.php?cPath=7_78_593&products_id=4568&osCsid=70fffae1563f0d6a4b6ad4093342af95)
but would need mods for the main stand
My Tigger came with guard and bracket removed, but all three holes had been rattled bigger, I eventually got around to sorting it and managed to get a U bolt on the center pipe and hang the bracket of it.
I then drilled the holes out to get them round ish then got one the fitters to turn me down some ally bar that was a snug fit in the holes but with a flange to act like the washer if that makes sense?
Nothings moved since fitting :D
If you have trouble sorting it let me know and I`ll have a word :wink:
cheers Pete, i am thinking of desiging a new one which will also be a suo guard, but must fit with the engine bars.
They guy i done the welding masks for is a welder :D plus my brother in law.