A real beginners mistake this one, I can't believe with nearly 40yrs engineering experience I actually did this.
I was doing valve clearances, which most you will know for Girlies is .10-.15mm inlet and .15-.2mm exaust. So I basically needed the 10, 15, and 20 feeler gauges. After the first one being tight, I thought I'm going to ned a shim tool. After three needing doing I'm thinking WTF!!
Then it dawned, feeler gauge was in thoudands of an inch :BangHead
Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Could be worse!!! I had a custom pair of made to measure leather trousers to come today and they don't fit :oops: :twisted: :oops: ,and it's a 240 mile(crap journey) round trip to sort e'm,bugger
senior moments....
Here, have a werthers original... :lol:
Quote from: "Bixxer Bob"Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Is that Up North speak for metric, as is Thambulance, " Shall I call Thambulance" :lol: :lol:
Hey don't take the p###, you'll be old someday and ...... bugger, I've forgotten what I was going to say :roll:
Quote from: "Timbox2"Quote from: "Bixxer Bob"Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Is that Up North speak for metric, as is Thambulance, " Shall I call Thambulance" :lol: :lol:
no, I just get tired of correcting the mistakes when I use the touch keyboard on my new Android tablet :?
Quote from: "Timbox2"Quote from: "Bixxer Bob"Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Is that Up North speak for metric, as is Thambulance, " Shall I call Thambulance" :lol: :lol:
no, I just get tired of correcting the mistakes when I use the touch keyboard on my new Android tablet
:?
Quote from: "Bixxer Bob"Quote from: "Timbox2"Quote from: "Bixxer Bob"Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Is that Up North speak for metric, as is Thambulance, " Shall I call Thambulance" :lol: :lol:
no, I just get tired of correcting the mistakes when I use the touch keyboard on my new Android tablet :?
Shouldn't that read "Theandroid tablet"?
Quote from: "blacktiger"Quote from: "Bixxer Bob"Quote from: "Timbox2"Quote from: "Bixxer Bob"Dug out themetric ones andall is well, they all are exactly the same as the last time. :oops: :oops: :oops:
Is that Up North speak for metric, as is Thambulance, " Shall I call Thambulance" :lol: :lol:
no, I just get tired of correcting the mistakes when I use the touch keyboard on my new Android tablet :?
Shouldn't that read "Theandroid tablet"?
Ahh, nearly, Thandroid, as opposed to Thapple, or ThIphone, crap, Im typing with a lizp, have to see thomeone about this
Bob, try switching to the Swype keyboard, it's really impressive, this from a dyed in the wool DOS man :wink: You can still type with it or switch back in a couple of taps.
Quote from: "Sin_Tiger"Bob, try switching to the Swype keyboard, it's really impressive, this from a dyed in the wool DOS man :wink: You can still type with it or switch back in a couple of taps.
Ah, DOS..... those were the days :?
Quote from: "Bixxer Bob"Quote from: "Sin_Tiger"Bob, try switching to the Swype keyboard, it's really impressive, this from a dyed in the wool DOS man :wink: You can still type with it or switch back in a couple of taps.
Ah, DOS..... those were the days :?
I still use DOS on almost a daily basis, most of Dells Server Diagnostics still rely on it
I still slip a decimal between Bar & Mpa . :roll:
Bring back Netware I :wink: