Print Page - Rubber Boot?

Title: Rubber Boot?
Post by: bunker on February 21, 2012, 01:42:41 PM

Is it possible to still get the rubber boot that sits in between (and underneath) the front brake pistons?

I've got a rebuild kit to go in and the paint stripped off, but the boots are well past their best.

Cheers :)

Title:
Post by: BruKen on February 21, 2012, 08:13:10 PM

Do you mean the bung? I'm not sure, but any makeshift rubber bung would be equally serviceable.

Title:
Post by: NeilD on February 21, 2012, 08:32:05 PM

these?

(http://www.triumphparts.gbr.cc/cdata/19769/img/19769_1179259.jpg)

http://www.triumphparts.gbr.cc/www.triu ... 9259&ack=9 (http://www.triumphparts.gbr.cc/www.triumphparts.gbr.cc/info.php?p=2&pid=1179259&ack=9)

Title:
Post by: bunker on February 21, 2012, 09:30:04 PM

Thank you very much NeilD - those are the very puppies! :D

Many thanks,

Title:
Post by: Sin_Tiger on February 22, 2012, 02:20:55 PM

I think I saw those on the Sprint Engineering website a while back, give Trev a call.

Title:
Post by: NeilD on February 22, 2012, 03:36:26 PM

yes, thats where the picture came from Sin.. :lol:

Title:
Post by: PeteH on February 23, 2012, 12:45:35 AM

Or you could get them here http://www.triumph-online.co.uk/brake-- ... -468-c.asp (http://www.triumph-online.co.uk/brake---caliper-mcyl-piston--seal-kits-468-c.asp)

A little bit cheaper, and sold seperately + postage

Title:
Post by: Sin_Tiger on February 23, 2012, 01:59:33 AM

Quote from: "NeilD"yes, thats where the picture came from Sin.. :lol:

Almost bed time, didn't spot the link :P :lol:

TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: bunker on February 21, 2012, 01:42:41 PM