is this cable what I need for my bike?
http://www.ebay.co.uk/itm/Renault-DDT20 ... 049wt_1297 (http://www.ebay.co.uk/itm/Renault-DDT2000-TuneECU-KKL-USB-Cable-Lead-for-PC-006-/320678573994?pt=UK_Diagnostic_Tools_Equipment&hash=item4aa9eeb7aa#ht_3049wt_1297)
Cheers
FTDI chipset is the one needed. Very close to one I bought from Amazon. Make sure you don't use the drivers that came with it though and download the FTDI drivers from the link provided at TuneEcu.
thanks mate, I'll proceed with the payment to complete transaction :)
So to clarify, the one in that link in the original post is definately the correct CABLE, we just need to download different drivers?
I need to retune my baby soon (I didn't retune when I fitted my Blueflame can - now i want to take the baffles out too).
Also, can anyone recommend which map I should use?
I'm running standard gearing, K&N filter, and an aftermarket BlueFlame dual port exhaust, with both baffles out.
Also, as above but with baffles in?
Just so I know which map I would need for either.
The right tune for yours is 10173Map.hex OEM from the download tables. The usual settings will need a tweak to make it run really nice and of course reset TPS every time the map or settings are adjusted. LTFT will be between 4:0 and 4:6 and IFT richen up till the misfire gets less at idle. Map will be good for baffles in or out.
On the subject of baffles it is wise if the end baffle that makes the tail pipe narrower is fitted as it increases low down torque but the db killers are omitted.
If you would really like to wake it up PM me your email and you can have a copy of my map to play with.