So I am progressing with getting my bike back on the road but as I go on I am finding more and more things that need attention. The latest is the OEM heated grips. The rubber is pretty warn and after I stripped down the left hand side of the handle bars I found the wiring for the grip just wrecked. Now, can I simply fit a new set of heated grips (Hot Grips or Oxford) and wire them into the OEM switch on the instrument cluster? I have no clue when it comes to electrickery.
Cheers.
I would use the controller that comes with the grips. The Oxford one has 3 control levels plus a voltage monitor that fetches them off when the VDC gets down to less than 12, useful if you get a problem with your charging circuit, might just be the difference between making it to refugee and pushing it :wink: