TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: petermiles01 on July 03, 2012, 11:15:53 PM

Title: How to fit a blueflame can
Post by: petermiles01 on July 03, 2012, 11:15:53 PM
Can anyone put a link to how to fit a blueflame can please. Got loads of different bolts and brackets but can't find the info.
Title:
Post by: BigDan on July 04, 2012, 12:59:37 AM
Fairly self explanatory...

1. take off old can and link pipe (will have a clamp over link pipe where it joins)
2. attach new link pipe (do not clamp yet)
3. attach can to link pipe, and put hanger strap around can
4. put a bolt through the hanger strap into the hole that is where the can mounts to the rear subframe underneath pillion seat
5. add clamps to where the link pipe connects to both pipe and can

voila
Title:
Post by: Bixxer Bob on July 04, 2012, 09:48:27 AM
There's a fairly comprehensive thread, just use the searchbutton. I posted some pics and drawings that will help
Title:
Post by: deepsouthtiger on July 05, 2012, 03:05:53 AM
Basically straight forward.  Good luck.
You are gonna LOVE the way it sounds  :D
I run mine with the baffle in and am very happy with it.
Title: Re: How to fit a blueflame can
Post by: Chad on July 14, 2012, 06:48:10 PM
Quote from: "petermiles01"Can anyone put a link to how to fit a blueflame can please. Got loads of different bolts and brackets but can't find the info.
:shock:  :shock:  :shock:  :shock:



no disrespects but
put down the spanners , and wait till you have a friend with you who knows how to wield a spanner,watch and learn as fitting an end can really isnt rocket science :wink:
EhPortal 1.34 © 2025, WebDev