Not strictly a Tiger I know but a Steamer based engine.
Was out on the Adventurer last weekend and enjoying the reminants of the great British Summer, ok it was dry.
Saw a few wet specs appear on the visor and looked up at the sky, not a cloud to be seen?????
Looked down and saw a tell-tale sign of leaking anti-freeze. Pulled over to investigate and could see the source was the header tank under the fuel tank.
So the leak was not terminal I rode home, removed the tank and hey presto the cheap nylon elbow was busted.
No problem I thought just get on the net and order some in as the bike is not my daily ride.
Well after a couple of hours and many cups of tea, there were none to be found.
(http://i1212.photobucket.com/albums/cc455/metalguru1/brasselbow.jpg)
These were the elbows I was after but for some reason could only find nicely priced in CANADA?????
I know UK has gone down the pan but no brass elbows only nylon??
Ordered 4 so that I can do both the Triumphs.
The company sent me an email of apology because due to the distance involved they would take 48-72hrs to turn up.
My belief in England just slipped another notch downwards, anyone need an engineer in Texas?
They're probably classed as Yorkshire fittings too :XXcomputer
A link to the company would help other people in the same boat Nigel.
And here is the fleabay link.
Very prompt delivery.
http://www.ebay.co.uk/itm/190688077908?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The company name is METTLEAIR Canada.
:thumbsup
Here IN the States, I found the brass elbows at the local mega-hardware emporium (Menards), BUT, I found them as part of a kit to do what I don't know and have forgotten.
Point is, you might be well served to look outside the box (while INside the mega-box : ).
Cosmo
ah nige i was quite calm and now you've put a stick in my hornets nest :doubt
it does seem that in this area we are going to rat shit............ save a place for me im coming with you.
ye hear that momma we're going to Texas !!!!!! :qgreenjumpers
right size 5/16, correct?
That will be 1/4" for the correct size, have a look at the link to ebay.
more options for us residents...
http://www.grainger.com/Grainger/PARKER-Union-Elbow-2GUG6?Pid=search
http://www.plumbingsupply.com/barb.html