Hey guys I purchased and installed happy trails 9" cliff cut bags and I would say I am impressed.
(http://i205.photobucket.com/albums/bb188/achtungschnell/BCB4C6E6-57F6-4FFF-A90E-1996055F76E6-490-0000008939A861F9.jpg)
(http://i205.photobucket.com/albums/bb188/achtungschnell/B20E3899-866F-404B-848B-FDC4172B4008-490-0000008934F9013C.jpg)
(http://i205.photobucket.com/albums/bb188/achtungschnell/B86CA8DB-878C-4C92-8830-AF8025838D61-490-0000008930458CFB.jpg)
I decided that I did not like how happy trail turn signal brackets angled the signals down so I cut 3/4" out of my signals and reinstalled them.
(http://i205.photobucket.com/albums/bb188/achtungschnell/467C2885-EB3C-4A8E-9265-11C0CC7AF838-490-000000893E6F7EC7.jpg)
I read a lot of reviews and the only thing they complained about was the mounting instructions, delivery, and missing bolts. I received my order a week and a half later, they are simple to install, bit I was missing 4 nuts and washers. Overall the build quality is very good and the rack seems very tough.
Nice! I haven't seen much about these before..... is the RH Pannier the same distance away from the bike as the LH? In the one rear image it almost looks like the RH bag is hanging further off the bike.
No the right hand frame is further away from the bike due to the exhaust. They bags are equal distance to the outer edge but the right side is cliff cut.(http://i205.photobucket.com/albums/bb188/achtungschnell/A866F3E3-B1AC-4CAF-A60C-2062328E9D78-3651-0000031AA7A0F2C6.jpg)