EvilBetty wrote:
In trying to save a little money, I dug and found a company that sells individual Colder (CPC) fittings to the public, QuickCouplings.net.
Where can I buy these female ones in the UK?
I suppose it'll be faster to Belgium then from the US.
Omega (http://www.omega.co.uk/ppt/pptsc.asp?ref=FTLC)do them although ISTR I actually got mine somewhere else......
Thanks! This will do, but rather expensive I think.
Tom Parker
Either Preston or Hampshire
http://www.tom-parker.co.uk/
Yes, I think that was where I got mine.
I've never forgotten phoning!!,as soon as I mentioned what I wanted 'oh you've got a Triumph Tiger have you'
Mine came from Tom Parker.
Just ordered the stuff from Tom Parker :thumbsup
Thanks!
part #? :thumbsup
http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A (http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A)
2 x CHROME PLATE BRASS COUPLING 1/4"BSPT MALE SHUT-OFF VITON: cLCD100040V
1 x CHROME PLATE BRASS INSERT 1/4" ID TUBE SHUT-OFF VITON: cLCD230-04V
1 x CHROME PLATE BRASS INSERT 3/8" ID TUBE SHUT-OFF VITON: cLCD230-06V
See also this thread
http://tigertriple.com/forum/index.php/topic,5670
Succes!
Quote from: Marc on November 24, 2012, 08:55:52 PM
http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A (http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A)
2 x CHROME PLATE BRASS COUPLING 1/4"BSPT MALE SHUT-OFF VITON: cLCD100040V
1 x CHROME PLATE BRASS INSERT 1/4" ID TUBE SHUT-OFF VITON: cLCD230-04V
1 x CHROME PLATE BRASS INSERT 3/8" ID TUBE SHUT-OFF VITON: cLCD230-06V
See also this thread
http://tigertriple.com/forum/index.php/topic,5670
Succes!
Thanks Marc
What about 8mm barbed brass elbow fittings to replace plastic ones (expansion tank)?
I cannot find elbows, only straight or three way... do they sell them? (it should be 5/16")
http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=7&level2=90&products_groups=3503&products_subgroups=3503B
Other sources in the EU?
Thanks
Somebody else was struggling to find these. Why not get a T piece and fill the redundant arm with solder / silicone? (trimming if necessary)
Metalguru is your man,he got his from Canada(I think!)
There you go.
http://www.tigertriple.com/forum/index.php/topic,12043.msg88287.html#msg88287