Just curious if anybody has tried these, weird tread pattern, sorry its a Tractor :hat10
http://www.youtube.com/watch?v=kc70-uvJ_rc&feature=player_embedded
Just bought a set. Haven't mounted them yet.
There are a few reviews on advrider.com
They seem to have better road handling and not give up much off road.
Planning on a set of these after I wear through the current shinkos...
Does anyone know of a reputable dealer in mid Washington State(east of Cascades; like Spokane, Wennachee, Tri-Cities etc) whom I could pre-order a set for my trip in mid-May? Currently I'm offshore on satellite internet with restricted server, so google is not my friend. Email address would be the best option. Thanks
Quote from: Kiwitex on March 24, 2013, 10:16:26 PM
Planning on a set of these after I wear through the current shinkos...
Am going to try them as my next set as well, got a couple of thousand to go on my Anakee IIs though.
Quote from: Red Lion on March 27, 2013, 08:40:58 AM
Does anyone know of a reputable dealer in mid Washington State(east of Cascades; like Spokane, Wennachee, Tri-Cities etc) whom I could pre-order a set for my trip in mid-May? Currently I'm offshore on satellite internet with restricted server, so google is not my friend. Email address would be the best option. Thanks
UPDATE:
I finally got home after 4 1/2 months offshore and found a deal on Annakee III's for my steamer. The best quote that I got was price-matched by the Triumph dealer in Spokane (http://www.empire-cycle.com/map_hours.asp), and came out as $155(F) + $175(R) + $118 (l, f & b) = $563 net!!
As a comparison, in B.C. the best quote that I got was $240(F) + $285(R) + $185(l, f & b) + $81.50 tax = $791.50.
The ride home was a complete shock for me as the bike that I knew for the last 8,000km's was gone. I had to get used to a totally different cornering strategy as the A III's were 'pulling' a far tighter radius at my normal approach speeds. The oversteer was quite disconcerting, as I was more accustomed to heavy understeer. I was actually having to correct my steering mid-corner to get back onto a decent line. Over the 440km trip home through twisty mountain passes I eventually learned that to achieve the same 'feel' through a bend compared with my old tyres, I'd have to increase my speed by about 25-35km/h depending on the bend! Now I'm no speedster on the roads(I save it for the dirt), but the A III's were turning me into someone that I have no intention of being, especially with precious cargo riding pillion.
Eventually I tempered my ride and found that I could confidently ride at speeds I was more accustomed to, but with a massive increase in margin-for-error on bends. In my limited road-riding experience (now 8,500km) I have never felt better, and feel rather foolish because I must have previously been riding right at the limit of my old tyres' capabilities without really realising it. A good wake-up call if ever one was needed!
I'm still impressed with the Metz 'Tourance'. Half worn,and still providing confident handling.
Yup, that's Anakee's for you, like you said, a wee but scary until you get used to them. If they are anything looks as good as the previous in the wet, you'll be well pleased :icon_mrgreen:
Yeah, I forgot to mention that 1/2 of my ride home through the mountain passes was in the rain, with lots of verge gravel washout on the bends. Total payload was 215 Kg (473lb). My next ride will be along forestry service roads (FSR) around the Okanagan. Of course, it'll be sans precious cargo. I want to gain experience on dirt roads before riding the Trans Canada Trail from my house to Nelson, B.C. in July. Unfortunately, I missed a free trail-riding introduction run by my local Triumph dealer by one day earlier this month due to offshore stuff, so I'm looking at learning by trial & error.