Has anyone else noticed this in set up?
Reset Adaption Triumph-Sagem-Lambda-models
1. Ensure bike is seeing a closed throttle position (CTP),
if not, then perform TPS reset.
2. Bike in Neutral
3. Coolant temperature between 80-96°C
4. Minimum air box temperature of 21°C
5. Now with clutch pulled, the speed even bring about 3000 1/min, hold the clutch pulled and let the engine
run at idle for at least 30 seconds.
Check bike is adapted by viewing Lambda Fuel.
Figures should be "toggling" +4 to -4
Don't forgot to check IACV steps are 20 - 35
Not seen that one before Nige, I'll look in my "other" manual when I get home.