Hi All.
Left the bike into the mechanics and a new shock is required.... the bike was noticeably soft on the way down so I feared the worst.
I'm in Belfast.... but can get shipped here.
I've an 885 Tiger
Basically it's like to know if anyone knows where I could get a good shock for the Tiger... but it isn't going to cost the equivalent of a months mortgage!
Please help :notworthy
I'm teetering on the edge of buying a Hagon. I know there are concerns about the bottom bush seizing, but I think proper routine maintenance shoud prevent that. Or, once I've got my mits on it and if it looks up to it, I might fit a grease nipple so all it'll need then is a regular squirt until clean grease comes out the sides :hat10
For what it's worth, Squaredeals do it cheaper than straigth from Hagon.... :5huh
You'll need either a Wilbers or Hyperpro,just be sure when comparing prices your also comparing spec,I think the Hyperpro is cheaper,but give some thought to a remote preload because without one the secondhand resale is nil.
A Hagon is better than a stocker,but jeeze thats not saying much.
I have a fully adjustable Wilbers on order for my '05 Girly. The Hagon is one size fits all like the oem, but relatively inexpensive and usually delivered from stock. The Wilbers (and Hyperpro, Yacugar and maybe other brands?) is custom made to weight, usage and riding style.
In NL a Hagon goes for € 389 (€ 589 with hydraulic prelaod adjuster), the Wilbers emulsion has a price of € 507 / 725. The 641 with seperate reservoir is € 710 / 928. That's list price off course ;) All including our 21% vat.
The Hagon can be built to requirements too, including lowering, see here:
http://www.squaredeals-ltd.co.uk/tiger-955i-2005-06-hagon-monoshock-cast-wheel-tiger-1600-p.asp
I know it's thought to be way behind the others, but we can't all afford big money.
For what it's worth I replaced the stocker with a "rebuilt" Hagon unit from sasquatch. I then added a grease fitting in the bottom mount and a shallow channel in the center of the bushing so the grease could disperse better. I've only had it on for a year but I've been watching it diligently and to date haven't had any issues with the bottom mount getting "stiff" or seizing.
I paired this with stiffer straight rate springs and cartridge emulators (also from sasquatch) and it's a much better ride than before. I've no doubt the hyperpro is a better quality unit but the Hagon is MUCH better than stock .. not slightly better .... MUCH better. :thumbsup
As for the concern ... time will tell but as long as you don't neglect the shock I don't think you'll have a problem ....
Quote from: Bixxer Bob on April 30, 2013, 10:24:17 PM
I know it's thought to be way behind the others, but we can't all afford big money.
To be honest I'm not such a rich dude either (some small advice: don't go in the business of selling bike parts and accessories if you want to make big $). Had the fortune I could buy the bike for less than anticipated so have some budget left to invest in it. One of the reasons is the relative high milage, so oem shock is rather tired anyway. The choice of a high end shock is a bit commercial also (at least, that's what I tell the wife), to promote suspension upgrades in used bikes.
Thank you all for your help and advice. :notworthy