TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: Mattisonjm on May 28, 2013, 03:04:07 AM

Title: Need help with carb tuning
Post by: Mattisonjm on May 28, 2013, 03:04:07 AM
Hi, this is my first post, and I need some help. I purchased a 96 equiped with mikunis around six months ago and she has always ggotten twenty mpg u.s. I always put it off as the dealership said they looked at it and didn't see a problem. Well the plugs finnally fouled out and the exhuast was soot black at wot so I removed the main jets and went to compare them to stock to see if they were oversized as I thought they were. They were way too big and I could only get my hands on 107.5's whuch I didn't think would be too big seeing as I'm certain the exhausts are aftermarket even though they don't look performance or anything so I installed them and put in new plugs I go her started rven though she was running kind off rough I put it up to her not running in a few weeks but after half a mile she made a loud pop and wouldn't start and run consistantly so rhats were I am. I'm assuming now that the mixtures arearen't right and it running lean because of the smaller jets and the air being set to accomodate the old jets. I as wondering what the adjuatment foe the mixture screws are and if anypne could give me some advice in general. Thanks!
Title: Re: Need help with carb tuning
Post by: Mustang on May 28, 2013, 03:57:44 AM
is the cap on the right hand snorkel .it needs to be .

and I would replace the float assembly o rings , it sounds like they are leaking .

everything you need to know can be found here

http://tigertriple.com/forum/index.php/topic,7592&start=0&postdays=0&postorder=asc&highlight=
Title: Re: Need help with carb tuning
Post by: Mattisonjm on May 29, 2013, 06:09:42 PM
Gracias amigo! I'll check this out!
EhPortal 1.34 © 2025, WebDev