Print Page - Engine support for head removal

Title: Engine support for head removal
Post by: 97tiger885 on March 29, 2014, 12:23:29 AM

Can I do this without grief or expense to support the Trident engine while I remove the head?

(http://i592.photobucket.com/albums/tt4/97tiger885/Trident%20900/Trident%20Head%20Removal/IMG_20140328_190521.jpg)

(http://i592.photobucket.com/albums/tt4/97tiger885/Trident%20900/Trident%20Head%20Removal/IMG_20140328_190510.jpg)

Front wheel is off the ground.

(http://i592.photobucket.com/albums/tt4/97tiger885/Trident%20900/Trident%20Head%20Removal/IMG_20140328_190552.jpg)

Advice appreciated.

Title: Re: Engine support for head removal
Post by: nickjtc on March 29, 2014, 05:56:32 AM

Better to have the cinder block with the holes upwards; otherwise, what the hey... go for it.

Title: Re: Engine support for head removal
Post by: 97tiger885 on March 29, 2014, 05:20:33 PM

Alright, I will get out the jacks and do it properly.

TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: 97tiger885 on March 29, 2014, 12:23:29 AM