My fuel cap seems to be broken. The key won't go right in.
I have taken out all the allen keys but can't remove it from the tank.
How can I get it out without knackering the tank?
Thanks
pretty sure you have to unlock it before it can be removed , even if you took the bolts out.
Ah, that could be a problem!!
WD40.
Soak it overnight then with a fine wire manipulate each pin until they all move freely (you COULD wiggle them with the key but you don't want to risk breaking it). Once the pins are free the key should go in. Don't forget to get some WD 40 down the side of the lock barrel as well.
Quote from: TigerT on April 04, 2014, 09:35:17 PM
Ah, that could be a problem!!
tiger T where in east sussex are you? do you get anywhere near cr :waveowborough seen a few Girly owners ride past my house
If its like a Steamer cap, there`s another bolt, you have to unlock the cap to get to it.
Hi exchead
If you mean Crowborough, I live there!
Am on the bike every day so you may have seen me about, let me know where you are.
Thanks all for tips, a good soaking with WD40 seems to have loosened it. Don't trust it now so will get a keyless one I think
Quote from: TigerT on April 05, 2014, 08:08:35 PM
Hi exchead
If you mean Crowborough, I live there!
Am on the bike every day so you may have seen me about, let me know where you are.
Thanks all for tips, a good soaking with WD40 seems to have loosened it. Don't trust it now so will get a keyless one I think
yes sorry crowborough it is u have a pm