Does anyone have any ways of holding the clutch basket while tightening the center nut? I know there is a specific tool but I dont have one. I am thinking of trying a strap wrench, just don't want to damage anything.
Anyway, once I get the DAR kit installed and check my valves... 22k miles with no trusted history. I should be good to ride the rest of the season.
Easy enough to make one yourself, basically its a piece of flat bar with a bend in it.
I`ll try and find a picture for you.
(http://d136nqpz68vrmx.cloudfront.net/schematics/schematics/triumph/tri001/TR-0606-2122.gif)
#19 is the real deal triumph one
you can make one by bolting two clutch plates together.
Triumph charges almost a C note for it :bug_eye
Thanks guys. I will try to find a piece of flat stock around here I can modify. The clutch plate idea looks good when I get some extra plates laying around. T