Print Page - 955i Workshop manual, valve tool etc (UK)

Title: 955i Workshop manual, valve tool etc (UK)
Post by: iansoady on July 15, 2014, 01:11:33 PM

As I no longer have a Tiger, is anyone interested in a (genuine Triumph) workshop manual (clean and complete), a Mustang valve shim tool (unused) and a Tuneboy cable / software? All for a wire wheel 955i.

£60 or so for the lot sound reasonable?

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: nickjtc on July 15, 2014, 05:19:49 PM

Are you going to come back to the fold at some point, Ian, or are you finished with Tigers....?

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: iansoady on July 16, 2014, 11:53:57 AM

I'm afraid the 955i and steamers are too heavy now, and I don't like the styling of the 800. Very happy with the Wee-Strom - and of course I now have this which is a "real" Tiger:

(http://i43.photobucket.com/albums/e398/iansoady/bike/T100/0413ta3_zpsbacdb5ea.jpg)

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: Cleaverid on August 04, 2014, 02:03:14 PM

Pm sent

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: Bixxer Bob on August 06, 2014, 09:23:48 PM

Just a small point Ian, the Tuneboy stuff won't work on any other bike unless the buyer purchases a key for their ECU from Tuneboy. The key ties the software to a specific ECU.

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: iansoady on August 07, 2014, 11:12:00 AM

Yes, and pointed out in the ebay ad. But it can still be used for reading codes, resetting sensors etc......

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: Geoff W on August 10, 2014, 09:52:27 PM

If it is still available , I am interested in the shim tool. I assume that it will work on a Steamer as well as a Girly.

Title: Re: 955i Workshop manual, valve tool etc (UK)
Post by: iansoady on August 11, 2014, 11:51:30 AM

Sorry, all now gone (on ebay).

TigerTriple.com

Marketplace => trash can => Topic started by: iansoady on July 15, 2014, 01:11:33 PM