Hello all... its been a while since i last posted here..!! anyway im hoping the collected wisdom on here can help me remove my damaged alarm..!!
two wires have rotted away right inside the main block one each side as it goes, a thick red on the bike side and a black one on the alarm side.
rather than mess about joining them i want to take it off.. so if anyone can help it will be much appreciated..
thanks in advance
Andy foster.
Can you provide a photo of what you have.
Difficulty level will vary dependant on make/type, as some may be plugged in, and others spliced to loom.
I would NOT recommend joining wires together until you know what they do.
Regards
Phil
Is it hard wired or plugged into the loom ??
Black and red: + and -??? :augie If so probably not a good idea to connect them.
I have taken the alam off it now sits on my bench.. i have seen somewhere on here about a plug that joins two wires together in the block that the alarm plugs into..
has anybody removed the alarm and knows which two wires it is?
I wont be joining any wires together. I just want rid of the alarm.....
oh and its a black 98 with trophy forks, daytona and trophy, wheels. home made under tray, lifted just a little at the back. and a few other little changes...
all of which make it handle and ride great :icon_biggrin:
thanks Andy
Here is the wiring diagram for the Steamer alarm. 48 is the 'alarm connection - sounder', 49 is the 'alarm connection - control unit', 33 is the fuse box.
I had a problem a while back with mine. Check this thread..http://www.tigertriple.com/forum/index.php/topic,13911.msg103828.html#msg103828
If your still stuck tomorrow,I can check the wiring on mine OK. Some more pics of your problem would be useful?