Earlier today while riding every now and then I kept feeling what I thought was a slight increase in a buzz through the bars, but you know how it is, maybe I was imagining it.
Anyway, just went out to the garage to give her a quick wipe over with a cloth and the above came back into my mind, I know, I'll just go round with the torque wrench, blimey, all the main mounts needed a significant tighten, and yes, I did them in the recommended sequence. So, if you havent for a while might be worth a check.
All main mount bolts (TX55 and 16mm) are 80Nm, the 12mm Bolts for the L/H head bracket are 30Nm.
Sequence, according to Haynes book of lies: Head Bracket First then; L/H Front; R/H Front; L/H Middle; L/H Rear Upper; L/H Rear Lower; R/H Middle; R/H Rear Upper; R/H Rear Lower
Worth putting in the "things you must get round to" Tim.