Poll
Question:
Dakar Style One Piece Winscreen?
Option 1: Yes, I can't get to my wallet fast enough!
votes: 1
Option 2: Sure, depending on cost
votes: 2
Option 3: Maybe
votes: 0
Option 4: Not for me
votes: 1
Option 5: No way, you're spoiling the looks of a classic!
votes: 1
Hello,
Me again with more Noob requests....sorry.
Anyone know where to get this windscreen? I am looking for a more upright screen Dakar style if you will. I really love the look of it!
Well I found this.....https://www.tourenfahrer.de/motorrad-mensch/leserbikes/leserbike-triumph-tiger/bilder-umbau-triumph-tiger-5/
which is apparently the bike.....and it appears it was custom made.
Thanks
Lots of Touratech stickers on the bike...clue? :icon_wink: Never seen one though.
that's an oldie ................................
it's a German bike
the fairing is a one off handmade fiberglass creation .
there were two of them made as far as I can remember .
Mudhen scored the second one and had on his steamer up until I bought his steamer from him .
he passed it on to someone but I can't remember who
It was heavy ,weighed a ton , dont see how he kept the cheesy OEM cockpit bracket from snapping
Hey everyone,
I am working with a local Denver (Colorado) area custom fiberglass company at the possibility of producing this windscreen. For now They are going to look at the pics I sent them and see if it's something they are wanting to do. I am hoping for at least two for myself (a spare), but I indicated that there could be more people on the forums who may also want these.
So......anyone else interested......cost depending that it is?????
Thanks
As Mustang says, made in grp they're usually heavy. I know of one friend who replaced his KTM 990 front after a drop and the grp effort was double the weight of the stock item. I'd recommend giving them a target weight so you don't get stuck with a couple of boat anchors.
It's crossed my mind to do this myself but using a former and thermoplastic but never took any further.
I hear ya, but these aren't exactly dainty bikes, plus for me at least if i loose a bit from my midsection it will compensate for the whole package :augie
Could it be 3d printed instead? You'd need to laser scan the original and then extend / adjust the shape using a cad package.
It would be lighter and you would have control of the shape. You could also retain the data to make more in the future.
When I first got my Steamer, I noticed the welded frame under the fairing had a break. I inserted a steel rod into the hollow tube which was broken, and it has held up fine. I would be wary about adding any additional weight to this area unless I beefed up the frame underneath. With this area being at the very end of the front of the bike, it gets a lot of stress from the conservation of angular momentum whenever you are riding on a bumpy road, especially a dirt road that is washboarded.
Quote from: ssevy on December 22, 2016, 03:05:26 PM
When I first got my Steamer, I noticed the welded frame under the fairing had a break. I inserted a steel rod into the hollow tube which was broken, and it has held up fine. I would be wary about adding any additional weight to this area unless I beefed up the frame underneath. With this area being at the very end of the front of the bike, it gets a lot of stress from the conservation of angular momentum whenever you are riding on a bumpy road, especially a dirt road that is washboarded.
I did exactly the same thing on mine, years ago, no stripping down required. Been fine for 10 yrs.
There was an improved mount frame for later ones, with double tubes where it bolts to the headstock.
Quote from: ssevy on December 22, 2016, 03:05:26 PM
When I first got my Steamer, I noticed the welded frame under the fairing had a break. I inserted a steel rod into the hollow tube which was broken, and it has held up fine. I would be wary about adding any additional weight to this area unless I beefed up the frame underneath. With this area being at the very end of the front of the bike, it gets a lot of stress from the conservation of angular momentum whenever you are riding on a bumpy road, especially a dirt road that is washboarded.
Yes Sir, I had the same issue and conducted the same fix!
Quote from: ssevy on December 22, 2016, 03:05:26 PM
When I first got my Steamer, I noticed the welded frame under the fairing had a break. I inserted a steel rod into the hollow tube which was broken, and it has held up fine. I would be wary about adding any additional weight to this area unless I beefed up the frame underneath. With this area being at the very end of the front of the bike, it gets a lot of stress from the conservation of angular momentum whenever you are riding on a bumpy road, especially a dirt road that is washboarded.
Mine has been welded up twice now, mostly used on rough pavement / gravel. No extra weight needed to cause issues.
How about looking at Plexiglas / Lexan? Lighter & can be tinted clear through black plus colours.
I thought about that as well. Right now I reached out to a fiberglass shop.
I do have a few acrylic shops near me that do fish tanks and such, I'll check with them as well.
There are plenty of inexpensive options for cruisers. Might be worth considering one of those and trim it to your needs.