Hey all,
Anyone of you know of a good place to source handlebar risers? 20mm I've heard is the max I can go if I don't want to mess with or replace cables and such.
My shop is telling me bark busters won't fit unless I use risers. Apparently they'll impact the fairing.
Also, for now I am going to keep the stock bars. Anyone know the bar diameter?
Thanks as always for the help. :XXsunsmile
Stock bars are 7/8".
I had 30mm risers on my old Steamer with all factory cables and hoses I remember having to loosen one or both banjo bolts for the hydraulic lines and rotate them down slightly to gain a little length. You will also have to play with the handlebar rotation and positioning of the mirrors and controls so they don't hit the screen at full lock it's close but with the right fiddling they will not touch.
Awesome!
Thank you for the info Sparky :wings
I have Rox risers ~ 50 mm. They can be tilted to move the bars front or rear. No new cables/hoses needed, just some careful rerouting. Been great for 8 years now.
Example here ...
http://www.ebay.ca/itm/Rox-Speed-FX-1R-P2SE-Elite-Series-Pivot-Handlebar-Riser-2in-Natural-7413-/261381675703?hash=item3cdb8fdab7:g:gEoAAOSwOtdYTD4Z&vxp=mtr
Thank you Fishnbiker,
I like those a bit better than what I've found so far. :icon_cool: