As per title.
I have a pair of original Steamer exhausts, that are in good condition externally, but I think the baffles have rusted out.
I'd like to put them back on the Steamer, so I can flog the Venoms that are currently fitted.
Anyone had a Steamer exhaust apart?
I've looked at this too. I've taken the stainless end caps off by drilling out the rivets, simple enough. Never got further than that but I believe you should be able to grind off the weld on the inner cap to be able to remove it with the baffle pipe attached, exposing the remaining wadding. Should be straight forward enough to weld it back again after repairs. As I say, that's the theory, never actually done it.
If you can hang on until next weekend I'll have a go with an old one and let you know how it goes.
Mutch appreciated