Print Page - How complicated to change the speedo from kpm version to MPH version?

Title: How complicated to change the speedo from kpm version to MPH version?
Post by: Greytiger on July 06, 2018, 01:16:25 PM

Hi

I have an 02 955 imported from europe - thus KPM speedo.
I'd like to replace this for MPH speedo plenty of which are available.

Is it as simple as just swapping them over ?

Is there any way to open the speedo and replace the white facia?

anyone done so and hit any snags?

thanks

dr

Title: Re: How complicated to change the speedo from kpm version to MPH version?
Post by: Mustang on July 06, 2018, 07:07:13 PM

on the 955's I believe the speedo is all you have to change , as the signal is a magnetic impulse from the front wheel
but there could well be something in the ecu that says otherwise................

Title: Re: How complicated to change the speedo from kpm version to MPH version?
Post by: Timbox2 on July 06, 2018, 10:33:00 PM

Im with Mustang, pretty sure the 1050 was the first Tiger where the instruments started communicating with the ECU

Title: Re: How complicated to change the speedo from kpm version to MPH version?
Post by: Chris Canning on July 06, 2018, 11:21:38 PM

Yep just buy a speedo off eBay.

Title: Re: How complicated to change the speedo from kpm version to MPH version?
Post by: Greytiger on July 07, 2018, 06:35:38 PM

Thanks everyone.. much appreciated

TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: Greytiger on July 06, 2018, 01:16:25 PM